Resource Library

To understand the difference between Ethernet II and 802.3, you first must know how Ethernet works. While Ethernet cables transmit data, their role is relatively simple compared to that of the Ethernet card — also referred to as an adapter. It’s within the function of this card that you find the differences between Ethernet II and 802.3.

Look back at the some of the highest paying IT certifications of 2020.

Most Internet users don't realize that often a website or other service that seems slow to respond is actually working fine. Instead, it’s the resolution of DNS that is putting a glitch in your giddy up. Fortunately, there are several steps you can take to optimize your DNS to get better performance.

Every second of every day, data is being sent and received. Billions of data packets are processed by your company’s network every day. In fact, you received dozens of packets just to read this article, but the vast majority of us have no idea how this works. People have no clue as to what goes on behind the scenes to ensure data actually gets to the right device.

The 2021 revised and updated version CISSP (Certified Information System Security Practitioner) certification exam will be released on May 1, 2021. This new version of the popular CISSP exam will include a modest revision and re-organization of previously included topics, but will integrate a significant number of new topics.

Learn about the five types of area networks.

The key difference between hubs, switches and bridges is that hubs operate at Layer 1 of the OSI model, while bridges and switches work with MAC addresses at Layer 2 of the OSI model.

While Apple has created many fine things, they were yet to be created themselves when Xerox PARC scientists created Media Access Control addresses. These MAC addresses are 48 bits or 6 bytes long, so they are also known as MAC-48 or EUI-48. EUI stands for Extended Unique Identifier. It is written in hexadecimal characters as shown below:

As IT departments struggle with skills gaps and businesses attempt to recovery economically from the COVID-19 pandemic, these 10 IT skills are essential to drive success. Job roles in these areas pay well, but decision-makers are struggling to find qualified candidates. If you’re looking to make an IT skills investment or start a new career path this year, these are the areas to consider.

While cybersecurity remains the most popular certification category in our IT Skills and Salary Report, foundational-level certifications highlight our list of the most popular IT certifications of 2020. 

According to the Global Knowledge IT Skills and Salary Report, women make up 16% of the tech workforce, and an even smaller percentage (8%) are at the senior or executive level. Here’s an overview of the most popular and most pursued certifications by women in tech.

Global Knowledge subject matter experts predict the top trends for 2020 in IT training, Microsoft, Cisco, AWS, cybersecurity and more.

Looking ahead at new and emerging certifications provides insight into the areas deemed valuable in the IT industry. If you are an early adopter or in a position where you need to show that you have the bleeding-edge expertise of a technology, this list of recent and upcoming certifications is for you. 

In support of software-defined networking, Cisco has introduced several products to strengthen networks and meet the increased demand for flexible and cost-efficient solutions. The Cisco SDN solution in the data center is ACI. Outside the data center the primary Cisco solution is DNA.

The CCNAX - CCNA Routing and Switching Boot Camp is a great option to obtain Cisco Routing and Switching skills while pursuing the CCNA Routing and Switching certification. 

Software-defined networking (SDN) is a solution that will enable your organization to meet the demands of network programmability and automation. The result will be greater network agility to support new applications while complying with increasing security needs.

Data center return on investment – which is measured by time to cost savings, time to revenue, time to break even, etc. – has proven more elusive than expected. But that doesn’t mean it isn’t attainable. To understand the genesis of the bad and ugly parts of data center ROI, we need to recognize the good parts and appreciate why so many companies are putting their faith in new and unfamiliar technologies.

In 2013, Cisco released their Software Defined Networking (SDN) solution for the data center known as Cisco Application Centric Infrastructure (ACI). For many years, the networking industry has been asking for an approach to configuring networking devices more efficiently than having to individually configure each and every router and switch.

Cisco Internetwork Operating System (IOS) has been around since a little after the inception of Cisco Systems as a company. In 1984, Len and Sandy Bosack from Stanford University founded Cisco Systems with a small commercial gateway server. The first Cisco router that I touched was an Advanced Gateway Server (AGS), which was the first marketed product of the company. After this came the Mid-Range Gateway Server (MGS), the Compact Gateway Server (CGS) and later the Integrated Gateway Server (IGS) and AGS+. The first version of IOS that I touched was 8.2(7). The operating system was based on a Unix-based system and was designed as a monolithic operating system, meaning that processes are stacked and interrelated.

Accessing cloud-based resources, whether they be IaaS/PaaS/SaaS-based, is very convenient. With a browser and Internet connection, you are up and running. No driving to your work office, no need to log into the corporate network. Just open up your web browser and go. This convenience, however, comes with a security risk. All of your business work is conducted over an insecure communication network. Unlike your office network, where the network link between you and the data center is under corporate control and is physically secure, the cloud access link is over the Internet.

Answer? When it is flagged as a retransmission in Wireshark!

Are you at a crossroads professionally or looking to start training for a new job? If so, you might want to consider pursuing network administration as a career. Network administrators are responsible for maintaining computer hardware and software systems that make up a computer network, including maintaining and monitoring active data networks, converged infrastructure networks, and related network equipment.

Multiplexing is the technology that is able to combine multiple communication signals together in order for them to traverse an otherwise single signal communication medium simultaneously. Multiplexing can be applied to both analog and digital signals. A benefit of using multiplexing, or muxing, is reducing the physical hardware cost for expensive dedicated network communication segments, such as copper or fiber cables.

The OSI model is a conceptual tool used to discuss and describe network functions. The use of a standard reference model is essential to communicating ideas as well as creating new technologies. It is a good idea to be familiar with the OSI model, the features assigned to each layer, and examples of common protocols or technologies associated with the OSI layers.

One of the many useful features of tunneling is to carry non-IP traffic across an IP network, and this is still the case when dealing with IPv6 traffic. This transition mechanism makes use of a configured tunnel to transport IPv6 over a native IPv4 network, which may consist of two sites or more. Unlike the previous transition mechanisms, tunneling is not monolithic; while the basic principles may be similar, the operations are different. The following chart gives a breakdown of the current, major tunneling types in use, particularly in a Cisco environment:

The STP (Spanning Tree Protocol) standard (IEEE 802.1d) was designed when the recovery after an outage could wait a minute or so and be acceptable performance. With Layer 3 switching in LANs, switching began to compete with routers running protocols because they are able to offer faster alternate paths. Rapid Spanning Tree Protocol (RSTP or IEEE 802.1w) brought the ability to take the twenty seconds of waiting for the Max Age counter plus fifteen seconds of Listening plus fifteen seconds of Learning or fifty seconds down to less than one second for point-to-point connected and edge switches and six seconds for root switches.

In a recent post, I gave an overall description of a service portfolio and the key components of a portfolio. Here, I will describe how a cloud services provider might implement an ITIL service portfolio. A cloud services provider will regularly have a set of services under development, a set of service in live operation, and a set of services that are retired.

This short example illustrates basic VLAN operation. Examining VLANs in a large-scale installation can show the full benefits of VLANs. Consider that this is a small portion of a large corporate headquarters with 5,000 devices connected in a 20 building campus.

Depending on the switch vendor, the exact steps will vary on how to set up and configure VLANs on a switch. For the network design shown, the general process for setting up VLANs on the switch is:

Now that the network is installed, each switch has a bridge ID number, and the root switch has been elected, the next step is for each switch to perform a calculation to determine the best link to the root switch. Each switch will do this by comparing the path cost for each link based on the speed. For paths that go through one or more other switches, the link costs are added. The switch compares this aggregate value to the other link costs to determine the best path to the root switch.

That depends on their configurations. For example: While it makes very good sense to include redundant physical links in a network, connecting switches in loops, without taking the appropriate measures, will cause havoc on a network. Without the correct measures, a switch floods broadcast frames out all of its ports, causing serious problems for the network devices. The main problem is a broadcast storm where broadcast frames are flooded through every switch until all available bandwidth is used and all network devices have more inbound frames than they can process.

I recently responded to a message on LinkedIn from a regular reader of this blog. He asked several questions which I will answer over the course of several posts. As part of his first question, he described a strategy report that his group is producing. The audience for this strategy report considers ITIL important to the future of their business, and so he must describe which ITIL processes his data center operations group works most closely with.

As we discussed previously, Cisco created the Nexus Operating System (NX-OS) to power its next-generation data-center switching platform. While this new OS shares many similarities to the original IOS, there are some definite differences that you need to be aware of as you begin using it.

The most obvious difference is that hubs operate at Layer 1 of the OSI model while bridges and switches work with MAC addresses at Layer 2 of the OSI model. Hubs are really just multi-port repeaters. They ignore the content of an Ethernet frame and simply resend every frame they receive out every interface on the hub. The challenge is that the Ethernet frames will show up at every device attached to a hub instead of just the intended destination (a security gap), and inbound frames often collide with outbound frames (a performance issue).

“Twisted Pair” is another way to identify a network cabling solution that’s also called Unshielded Twisted Pair (UTP) and was invented by Alexander Graham Bell in 1881. Indoor business telephone applications use them in 25-pair bundles. In homes, they were down to four wires, but in networking we use them in 8-wire cables. By twisting the pairs at different rates (twists per foot), cable manufacturers can reduce the electromagnetic pulses coming from the cable while improving the cable’s ability to reject common electronic noise from the environment.

Good question! There are lots of networks, so I’m sorry to say that it depends. Let me explain. The smallest computer-based networks are usually PANs or Personal Area Networks. They can connect a wireless keyboard, mouse, or other devices to a computer. You may find them wirelessly linking a printer to your computer. You may have noticed these all include wireless connections. A PAN most often uses wireless technologies like infrared and Bluetooth, so it is really a WPAN (Wireless Personal Area Network).

Anyone who’s managed switches over the years knows that the Spanning-tree protocol (STP) is both the best and worst thing to ever happen to the data center at layer 2 of the OSI model. On the plus side, the Spanning-tree protocol is what first allowed us to create redundant paths within our switching infrastructure, making our data center much more resilient to outages than ever before. Anyone who’s experienced a “broadcast storm” knows the full value of Spanning-tree in the traditional switching environment. We’ve also seen many improvements in Spanning-tree over the years to make it work faster and more efficiently (i.e. Rapid Spanning-tree, Bridge Assurance, and many others).

The Cisco UCS is truly a “unified” architecture that integrates three major datacenter technologies into a single, coherent system: Computing Network Storage Instead of being simply the next generation of blade servers, the Cisco UCS is an innova­tive architecture designed from scratch to be highly scalable, efficient, and powerful with one-third less infrastructure than traditional blade servers.

For us wireless folks that aren’t stellar routing and switching guys, one of the most daunting network tasks is integrating our WLAN infrastructure with the existing wired infrastructure and its services. Understanding wired design topics is pretty fundamental to installing or managing any network, so it really should be on our priority list to spruce up those skills. To give you a nudge on your journey, let’s talk about DHCP for wireless clients.

I attended a meeting this week with a customer of mine and a potential new vendor. The new vendor was there to pitch his configuration and setup service offerings for a specific ITSM toolset. My customer has already had one bad experience with an ITSM tool configuration vendor who promised one thing and delivered much less. He ended up with a tool that’s minimally used and not configured to match his business needs. He’s looking for a vendor that can understand his business needs and priorities and quickly help him get his tool configured and working in a short time frame. Then the topic of standard changes came up. My customer asked for examples of standard changes. The vendor responded, “Server reboots are an example of standard changes.”