Resource Library

Join Microsoft SQL Server expert Brian Egler for an hour-long webinar covering the key features and updates in the upcoming release of Microsoft SQL Server 2014! You will get a thorough review, along with demonstrations, of how SQL Server 2014 provides substantial improvements in performance, manageability, and availability that will make your job easier.

If you're running SharePoint 2010, learn how SharePoint 2013 is different and what you'll need to learn to deploy it effectively.

One of the many useful features of tunneling is to carry non-IP traffic across an IP network, and this is still the case when dealing with IPv6 traffic. This transition mechanism makes use of a configured tunnel to transport IPv6 over a native IPv4 network, which may consist of two sites or more. Unlike the previous transition mechanisms, tunneling is not monolithic; while the basic principles may be similar, the operations are different. The following chart gives a breakdown of the current, major tunneling types in use, particularly in a Cisco environment:

When properly utilized, VLANs and trunks provide flexibility, stability and ease of troubleshooting. This paper provides technical details about VLANs and trunks, along with design options at a basic to intermediate level. Recommendations and commands are included throughout.

In this white paper, you'll discover what SAP BusinessObjects and Web Intelligence can deliver. When it comes to accessing large amounts of data and then creating customized and sophisticated analytical reports, you'll see why Web Intelligence is a wise choice.

Software-defined networking (SDN) is a solution that will enable your organization to meet the demands of network programmability and automation. The result will be greater network agility to support new applications while complying with increasing security needs.

The key difference between hubs, switches and bridges is that hubs operate at Layer 1 of the OSI model, while bridges and switches work with MAC addresses at Layer 2 of the OSI model.

That depends on their configurations. For example: While it makes very good sense to include redundant physical links in a network, connecting switches in loops, without taking the appropriate measures, will cause havoc on a network. Without the correct measures, a switch floods broadcast frames out all of its ports, causing serious problems for the network devices. The main problem is a broadcast storm where broadcast frames are flooded through every switch until all available bandwidth is used and all network devices have more inbound frames than they can process.

Now that the network is installed, each switch has a bridge ID number, and the root switch has been elected, the next step is for each switch to perform a calculation to determine the best link to the root switch. Each switch will do this by comparing the path cost for each link based on the speed. For paths that go through one or more other switches, the link costs are added. The switch compares this aggregate value to the other link costs to determine the best path to the root switch.

Learn about the five types of area networks.

Multiplexing is the technology that is able to combine multiple communication signals together in order for them to traverse an otherwise single signal communication medium simultaneously. Multiplexing can be applied to both analog and digital signals. A benefit of using multiplexing, or muxing, is reducing the physical hardware cost for expensive dedicated network communication segments, such as copper or fiber cables.

The most obvious difference is that hubs operate at Layer 1 of the OSI model while bridges and switches work with MAC addresses at Layer 2 of the OSI model. Hubs are really just multi-port repeaters. They ignore the content of an Ethernet frame and simply resend every frame they receive out every interface on the hub. The challenge is that the Ethernet frames will show up at every device attached to a hub instead of just the intended destination (a security gap), and inbound frames often collide with outbound frames (a performance issue).

“Twisted Pair” is another way to identify a network cabling solution that’s also called Unshielded Twisted Pair (UTP) and was invented by Alexander Graham Bell in 1881. Indoor business telephone applications use them in 25-pair bundles. In homes, they were down to four wires, but in networking we use them in 8-wire cables. By twisting the pairs at different rates (twists per foot), cable manufacturers can reduce the electromagnetic pulses coming from the cable while improving the cable’s ability to reject common electronic noise from the environment.

Good question! There are lots of networks, so I’m sorry to say that it depends. Let me explain. The smallest computer-based networks are usually PANs or Personal Area Networks. They can connect a wireless keyboard, mouse, or other devices to a computer. You may find them wirelessly linking a printer to your computer. You may have noticed these all include wireless connections. A PAN most often uses wireless technologies like infrared and Bluetooth, so it is really a WPAN (Wireless Personal Area Network).

CompTIA has raised the bar for Network+ candidates. The new certification exam has significant changes to the five "domains" or knowledge areas with new content related to security, cloud, data-center and operational concerns and troubleshooting. There is also a greater emphasis on wireless networking and VoIP. Use this white paper to help you gain an overview of what's new and what's different.

Answer? When it is flagged as a retransmission in Wireshark!

I recently responded to a message on LinkedIn from a regular reader of this blog. He asked several questions which I will answer over the course of several posts. As part of his first question, he described a strategy report that his group is producing. The audience for this strategy report considers ITIL important to the future of their business, and so he must describe which ITIL processes his data center operations group works most closely with.

Are you at a crossroads professionally or looking to start training for a new job? If so, you might want to consider pursuing network administration as a career. Network administrators are responsible for maintaining computer hardware and software systems that make up a computer network, including maintaining and monitoring active data networks, converged infrastructure networks, and related network equipment.

There are several Wireless LAN Standards, including b, g, and n, which exist in the 2.4 GHz band. These standards need around 20 MHz of radio frequency in order to transmit their signals. In this video, Ben Miller discusses how to pick access points and channels for optimal performance.