Checkout

Cart () Loading...

    • Quantity:
    • Delivery:
    • Dates:
    • Location:

    $

Resource Library

Filter By

Topics

Show Filters
Result Filters:

140 Results Found

Results per page: 10 40 80

“nat-control” versus “no nat-control”

Article | Nov. 24, 2009

ASA and PIX software version 7.0 introduced the configuration command nat-control which didn’t exist in previous versions of code. Although training course material for both the SNAF (Securing Networks with ASA Fundamentals) and SNAA (Securing Networks with ASA Advan...

VPN Connection Process

Article | Jan. 05, 2010

There are some common misconceptions on the part of some of my students as to how VPN sessions are established from either a remote location or remote user to the ASA firewall. In particular, a “gray area” seems to be when the attributes from the tunnel group are app...

AnyConnect Syslog Troubleshooting

Article | Feb. 15, 2010

I recently was presented with the challenge of logging ALL of the pertinent connection, disconnection, and termination messages associated with the Cisco SSL AnyConnect client without overwhelming the syslog capture display with extraneous messages. This blog will br...

10 Security Concerns for Cloud Computing

White Paper | March 11, 2010

The flexibility, reduced cost, and mobility of cloud computing have made the concept a hot topic. Before implementing this method of computing, however, it is important to consider the security of the "cloud." In this white paper, you will learn some of the risks and benefits of cloud computing to be sure it is the right solution for you.

Allow or Disallow All IPSec Traffic through the Firewall?

Article | June 02, 2010

The subject of this week’s post was actually prompted by a question from a former colleague.  Soon after the PIX Firewall added support for IPSec Virtual Private Networks, a command was added to the command-line, sysopt connection permit-ipsec. This command was subse...

10 Ways Malicious Code Reaches Your Private Network

White Paper | July 13, 2010

Private networks are under constant threat of attack, even when steps have been taken to "secure" them. The large volume of malicious codes, and their ability to evolve and adapt, requires security professionals and common computer/internet users alike to be mindful of their actions and constantly play defense. This white paper focuses on 10 common ways that malicious code can penetrate a network. Knowledge of these methods and the ability to recognize them are the first steps in preventing them from succeeding in harming your network.

Using ASDM with Minimum User Privileges

Article | July 30, 2010

Occasionally as I'm teaching a Cisco training class, I get an idea for a blog post and it happened again this week. The Securing Networks with ASA Fundamentals curriculum is mostly based on the Adaptive Security Device Manager (ASDM). While the class describes the us...

Examining IPSec Perfect Forward Secrecy

Article | Sep. 17, 2010

A feature common to IPSec Virtual Private Network implementations throughout the Cisco product line is Perfect Forward Secrecy (PFS). This optional additional component is now a default supplied configuration setting with the Adaptive Security Device Manager (ASDM) I...

ASA ACL Logging

Article | Oct. 10, 2010

As any network administrator will tell you, the ASA Security appliance (as well as its forerunner, the PIX) are capable of generating massive amounts of log messages, especially when the firewall/security appliance is set to log messages at debug level to the syslog...

Protecting Your Network with Authentication and Cryptography

Webinar – Recorded | Feb. 09, 2011

In this webinar, the first of two based on our Cybersecurity Foundations course, you will examine the following topics: verifying users and what they can access, ways a user can be validated to computer and network resources, how cryptography is used to protect data, symmetric and asymmetric encryption and hashes.

Securing Communications

Webinar – Recorded | Feb. 23, 2011

In this webinar, the second of two based on our Cybersecurity Foundations course, you'll build on what you learned in the first of the series, Protecting Your Network with Authentication and Cryptography.

Are Production Server Reboots Standard Changes?

Article | April 27, 2011

I attended a meeting this week with a customer of mine and a potential new vendor. The new vendor was there to pitch his configuration and setup service offerings for a specific ITSM toolset. My customer has already had one bad experience with an ITSM tool configuration vendor who promised one thing and delivered much less. He ended up with a tool that’s minimally used and not configured to match his business needs. He’s looking for a vendor that can understand his business needs and priorities and quickly help him get his tool configured and working in a short time frame. Then the topic of standard changes came up. My customer asked for examples of standard changes. The vendor responded, “Server reboots are an example of standard changes.”

How to Avoid a Cyber Disaster

Webinar – Recorded | April 27, 2011

Planning for a cyber disaster makes recovering from one much easier. Still, as important as disaster planning is, it's often overlooked or put off until it is too late. In this webinar, Global Knowledge instructor Debbie Dahlin discusses planning for the unexpected -- whether the unexpected means a simple power outage, a network security breach, or a major natural disaster. She'll discuss risk analysis and risk management techniques and explain the importance and process of creating a business continuity plan. Using a fictional company as an example, Debbie will walk you through the disaster planning process a security professional should use, and she will provide simple tricks to reduce your company's downtime before, during, and after a disaster.

The 5 Phases of Hacking: Covering Your Tracks

Article | Aug. 30, 2011

An attacker needs to destroy evidence of his presence and activities for several reasons like being able to maintain access and evade detection (and the resulting punishment). Erasing evidence of a compromise is a requirement for any attacker who wants to remain obscure and evade trace back. This usually starts with erasing the contaminated logins and any possible error messages that may have been generated from the attack process.

Network Forensics Analysis: A New Paradigm in Network Security

Webinar – Recorded | Oct. 26, 2011

In this hour-long webinar, security expert and Global Knowledge instructor Phillip D. Shade will provide insight into the emerging network security science of network forensics analysis, a.k.a. security event analysis and reconstruction. Using case studies, you will examine the role of data retention in network forensics analysis, and you will learn about applying forensics analysis techniques to handle application-based attacks, VoIP call interception, and worms, bots, and viruses.

DHCP for Wireless LAN Clients

Article | Jan. 31, 2012

For us wireless folks that aren’t stellar routing and switching guys, one of the most daunting network tasks is integrating our WLAN infrastructure with the existing wired infrastructure and its services. Understanding wired design topics is pretty fundamental to installing or managing any network, so it really should be on our priority list to spruce up those skills. To give you a nudge on your journey, let’s talk about DHCP for wireless clients.

Hacking Back In Self-Defense: Is It Legal? Should It Be?

Webinar – Recorded | Feb. 01, 2012

Your business has been hacked, leaving you with a persistent bot; now what? In this hour-long webinar, security expert David Willson will discuss ways you can eliminate the threat in an act of self-defense or defense of property. As new laws are explored, old ones amended, and solutions sought, you'll take a look at thinking outside the box to give the good guys the advantage-or at least a fighting chance.

What is the Cisco UCS Manager?

Article | Feb. 01, 2012

The Cisco UCS is truly a “unified” architecture that integrates three major datacenter technologies into a single, coherent system: Computing Network Storage Instead of being simply the next generation of blade servers, the Cisco UCS is an innova­tive architecture designed from scratch to be highly scalable, efficient, and powerful with one-third less infrastructure than traditional blade servers.

Cisco UCS: Spanning-Tree Need Not Apply!

Article | Feb. 15, 2012

Anyone who’s managed switches over the years knows that the Spanning-tree protocol (STP) is both the best and worst thing to ever happen to the data center at layer 2 of the OSI model. On the plus side, the Spanning-tree protocol is what first allowed us to create redundant paths within our switching infrastructure, making our data center much more resilient to outages than ever before. Anyone who’s experienced a “broadcast storm” knows the full value of Spanning-tree in the traditional switching environment. We’ve also seen many improvements in Spanning-tree over the years to make it work faster and more efficiently (i.e. Rapid Spanning-tree, Bridge Assurance, and many others).

Five Secrets for Successfully Virtualizing a Data Center

White Paper | April 04, 2012

Here are some secrets, tips, and tricks for virtualizing your datacenter. We want to introduce some best practices for virtualization, while not being too biased towards one virtualization vendor or another. We'll use some common examples of products and tools that work with VMware's vSphere and Microsoft's Hyper-V, but with an eye toward virtualization in general, and not the specifics of any of the capable platforms that could be used). We will assume, however, that bare metal hypervisors, in other words virtualization platforms where the hyper visor is the OS, will be used as opposed to running a hypervisor on top of an existing general-purpose operating system (which is great in a lab, but terrible for data center projects).

12 Steps to Bring Your Own Device (BYOD) Success

White Paper | April 16, 2012

IT departments have multiple opportunities and challenges as a result of the Bring Your Own Device (BYOD) invasion. The most common opportunity is to reinforce enterprise network security from both the inside and the outside. Supporting BYOD also offers more monitoring and tracking of activities that provide a more detailed view of network traffic flow. Alternatively, it will be a challenge for some IT departments to give up control over which devices may access their enterprise network. Another challenge will be to have the users doing configurations for network access, which adds human error to a crucial part of the process. The opportunities and challenges BYOD represents are real. Enterprises must make their network infrastructure BYOD ready to meet the onslaught.

What is Twisted Pair and Does It Work?

Article | June 12, 2012

“Twisted Pair” is another way to identify a network cabling solution that’s also called Unshielded Twisted Pair (UTP) and was invented by Alexander Graham Bell in 1881. Indoor business telephone applications use them in 25-pair bundles. In homes, they were down to four wires, but in networking we use them in 8-wire cables. By twisting the pairs at different rates (twists per foot), cable manufacturers can reduce the electromagnetic pulses coming from the cable while improving the cable’s ability to reject common electronic noise from the environment.

Data Center Basics: the Differences Between IOS and NX-OS

Article | Sep. 04, 2012

As we discussed previously, Cisco created the Nexus Operating System (NX-OS) to power its next-generation data-center switching platform. While this new OS shares many similarities to the original IOS, there are some definite differences that you need to be aware of as you begin using it.

What Happens If I Have More Than One Switch With Redundant Links?

Article | Oct. 11, 2012

That depends on their configurations. For example: While it makes very good sense to include redundant physical links in a network, connecting switches in loops, without taking the appropriate measures, will cause havoc on a network. Without the correct measures, a switch floods broadcast frames out all of its ports, causing serious problems for the network devices. The main problem is a broadcast storm where broadcast frames are flooded through every switch until all available bandwidth is used and all network devices have more inbound frames than they can process.

Zero Day Exploits

White Paper | Oct. 23, 2012

For several years, most news articles about a computer, network, or Internet-based compromise have mentioned the phrase "zero day exploit" or "zero day attack," but rarely do these articles define what this is. A zero day exploit is any attack that was previously unknown to the target or security experts in general. Many believe that the term refers to attacks that were just released into the wild or developed by hackers in the current calendar day. This is generally not the case. The "zero day" component of the term refers to the lack of prior knowledge about the attack, highlighting the idea that the victim has zero day's notice of an attack. The main feature of a zero day attack is that since it is an unknown attack, there are no specific defenses or filters for it. Thus, a wide number of targets are vulnerable to the exploit.

Risk Management with RSA’s Archer GRC Framework

Article | Dec. 05, 2012

Risk is something we deal with on a daily basis. Living in New Jersey and having the occasional storm, I’ve recently performed my own risk assessment determining the value of certain assets and activities and made a decision on what I was willing to spend to reduce risk to what I perceived as an acceptable level. My management of risk was a rather simple case. Sure, in my revised business continuity plan for my home, I’ll make sure that I have more D cell batteries, have my garage door adjusted so it opens manually again, more food I can heat on a stove and that doesn’t rely on refrigeration, and finally I’ll consider a whole house gas generator that uses natural gas, which has always been available to power critical systems like the sump pump in my basement. What if, however, I was a really large business? One with lots of components and interdependencies that require a tight integration in order to succeed? How and where can a large volume of information necessary to management, business continuity, and disaster recovery be correlated and communicated to those individuals who, because of their roles and responsibilities, need to make the critical decisions regarding the management of risk?

Top 10 Cybersecurity Risks: How Prepared Are You for 2013?

White Paper | Jan. 24, 2013

Rather than looking back over the past year, organizations and individuals need to start assessing cybersecurity threats that lie ahead in the New Year. While there is always the chance for a new threat or risk to be unearthed this year, often the risks of the New Year are predicable from the trends of attacks from the previous year. However, other factors need to be considered as well, including new technologies, new software and applications, mobility, etc. Here are my predictions of the areas to watch for new security threats. When it comes to cybersecurity, we have a lot to look out for, take precautions against and be paranoid about.

Custom Cisco CCNP Security Training Labs

Video | Feb. 27, 2013

Course director Jim Thomas explains how our custom labs, which utilize external hosts, ISR routers, and DMZ, provide a real-world environment for students.

Using Countermeasures to Ensure Risk Management

Article | July 03, 2013

While the last few years have brought about many great advances in IT and network technology security and risk management have a critical point. There is a host of new concerns the IT security manager must be concerned with, including social networking, mobile, cloud, and information sharing. This has unleashed a new wave of change and potential risk. Risk management is required to deal with these emerging technologies and should provide the rationale for all information security activities within the organization. You can think of risk management as the process of ensuring that the impact of threats and exploited vulnerabilities is within acceptable limits at an acceptable cost. Risk management requires the use of countermeasures. Countermeasures can include any process that serves to reduce threats or vulnerabilities.

FIREWALL 2.0 - Deploying Cisco ASA Firewall Solutions

Video | July 11, 2013

Global Knowledge instructor Doug Notini discusses the benefits of our FIREWALL 2.0 - Deploying Cisco ASA Firewall Solutions course.

Top 12 SonicWALL CSSA Exam Prep Tips

Article | Aug. 21, 2013

Dell SonicWALL's CSSA (Certified SonicWALL Security Administrator) exam is an open book, online certification exam that certifies a student’s understanding of the SonicOS Unified Threat Management (UTM) operating system. The exam tests a student’s network security knowledge, and their ability to use the GUI menu structure for configuration of standard network security scenarios.

Applying the Four Standards of Security-Based CIA

Article | Aug. 29, 2013

Constant change in the technology landscape has been mirrored by the steady evolution of information security. The current information system environment is increasingly complex, comprising storage, servers, LANs/WANs, workstations, Unified Communications, Intranet, and Internet connections.

Cybersecurity Necessities: A Firewall, Antivirus, and a Well-Trained Workforce

Webinar – Recorded | Oct. 03, 2013

You have spent money on software and hardware, implemented best practices, and believe you are secure, right? You may have overlooked the weakest link: your employee. Many breaches occur as a result of an employee mistakenly clicking on a link or visiting a site that allows a virus to be unknowingly downloaded, giving hackers access to your network. Today, a well-trained workforce is a necessity and may even be your most important cybersecurity tool. In this webinar, security expert David Willson will discuss how many breaches have occurred and are occurring, the tools and techniques hackers use to trick employees into clicking on links or opening attachments, and how to prevent such behavior.

List of IT Skills

Special Report | Jan. 01, 2014

Organizations are moving strongly toward Bring Your Own Device (BYOD) access, bringing outsourced activities back in-house, and finding ways to make use of the growing amounts of data flowing in from many new sources such as social media. These factors create an increasing shift in required and desired skills showing up in IT departments. Hiring and salary surveys, such as the 2014 IT Skills and Salary Survey from Global Knowledge and Windows IP Pro, TEKsystems' 2014 Annual IT Forecast, Foote Research Group's 2014 IT Skills and Certifications Pay Index, Computerworld's annual Forecast survey, Robert Half Technology Survey, and information from the US Bureau of Labor Statistics, Futurestep, Mondo, GovLoop, and Dice have presented a developing picture of the IT skills that will be in demand in 2014. Here, in survey order, are the top 10 major skills and why they made the list.

Cisco DCUFI Training and Data Center Challenges

Video | Feb. 27, 2014

Instructor Carol Kavalla talks about the advantages of taking a Cisco Data Center Unified Fabric Implementation class from Global Knowledge.

What DMVPN Is and Why We Should Care

Article | April 03, 2014

According to Cisco marketing, Dynamic Multipoint VPN (DMVPN) “will lower capital and operation expenses, simplifies branch communications, reduces deployment complexity, and improves business resiliency.” Okay. But what is it, really, and why should we care?

Why Your Company Should Have a Risk Management Program

Webinar – Recorded | April 22, 2014

Does your company have a risk management program? In this hour-long webinar, cybersecurity expert and Global Knowledge instructor David Willson will explain why you should. In light of recent breaches at Target, Nieman Marcus, Michaels, Yahoo, and a growing list of others, we're learning that FBI Director Mueller was right when he said getting breached is not a matter of if, but when. While having a risk management program may not prevent a breach, it can certainly lower the risk of one, ensure compliance, and reduce or even eliminate your liability if a breach does occur, enabling you to recover quickly and to protect your reputation. Beyond explaining the importance of a risk management program, David will tell you how to implement one, including conducting a basic risk assessment, policies you'll need, and training your workforce.

Cybersecurity: Physical Security

Webinar – Recorded | May 26, 2014

As an IT professional you deal day in and day out with securing operating systems, patching software, installing and configuring firewall and routers But what about the physical infrastructure? Do you understand how simple techniques can allow theft of your company resources? In this session we will discuss how to reduce the possibility of loss of data and equipment. Physical security may not be part of your job but you should be aware and having discussions with the personnel who are responsible. Or does Physical Security become one of your job responsibilities? Come to this session and learn about one of the most important and yet least thought about areas of security by IT professionals.

Fundamentals of the PKI Infrastructure

White Paper | June 02, 2014

Securing corporate information can be a challenge, considering the numerous technologies and platforms that need to be protected. One technology that definitely helps achieve secure data is public key infrastructure (PKI), which enhances the security of data by using advanced access methods and making sure the authenticity of the data flow is preserved.

How Your Digital Footprint Could Become A Security Risk

Article | Aug. 21, 2014

Have you ever Googled yourself to see how much of your personal information is online? In many cases it can be pretty scary and include things like your home address, phone number, likes, dislikes, etc. One young man searched for himself and found all of his banking information online. In that case it turned out to be a mistake by a bank employee, exposing the banking information of 86,000 customers.