Resource Library

For several years, most news articles about a computer, network, or Internet-based compromise have mentioned the phrase "zero day exploit" or "zero day attack," but rarely do these articles define what this is. A zero day exploit is any attack that was previously unknown to the target or security experts in general. Many believe that the term refers to attacks that were just released into the wild or developed by hackers in the current calendar day. This is generally not the case. The "zero day" component of the term refers to the lack of prior knowledge about the attack, highlighting the idea that the victim has zero day's notice of an attack. The main feature of a zero day attack is that since it is an unknown attack, there are no specific defenses or filters for it. Thus, a wide number of targets are vulnerable to the exploit.

Now that the network is installed, each switch has a bridge ID number, and the root switch has been elected, the next step is for each switch to perform a calculation to determine the best link to the root switch. Each switch will do this by comparing the path cost for each link based on the speed. For paths that go through one or more other switches, the link costs are added. The switch compares this aggregate value to the other link costs to determine the best path to the root switch.

That depends on their configurations. For example: While it makes very good sense to include redundant physical links in a network, connecting switches in loops, without taking the appropriate measures, will cause havoc on a network. Without the correct measures, a switch floods broadcast frames out all of its ports, causing serious problems for the network devices. The main problem is a broadcast storm where broadcast frames are flooded through every switch until all available bandwidth is used and all network devices have more inbound frames than they can process.

I recently responded to a message on LinkedIn from a regular reader of this blog. He asked several questions which I will answer over the course of several posts. As part of his first question, he described a strategy report that his group is producing. The audience for this strategy report considers ITIL important to the future of their business, and so he must describe which ITIL processes his data center operations group works most closely with.

The most obvious difference is that hubs operate at Layer 1 of the OSI model while bridges and switches work with MAC addresses at Layer 2 of the OSI model. Hubs are really just multi-port repeaters. They ignore the content of an Ethernet frame and simply resend every frame they receive out every interface on the hub. The challenge is that the Ethernet frames will show up at every device attached to a hub instead of just the intended destination (a security gap), and inbound frames often collide with outbound frames (a performance issue).

“Twisted Pair” is another way to identify a network cabling solution that’s also called Unshielded Twisted Pair (UTP) and was invented by Alexander Graham Bell in 1881. Indoor business telephone applications use them in 25-pair bundles. In homes, they were down to four wires, but in networking we use them in 8-wire cables. By twisting the pairs at different rates (twists per foot), cable manufacturers can reduce the electromagnetic pulses coming from the cable while improving the cable’s ability to reject common electronic noise from the environment.

IT departments have multiple opportunities and challenges as a result of the Bring Your Own Device (BYOD) invasion. The most common opportunity is to reinforce enterprise network security from both the inside and the outside. Supporting BYOD also offers more monitoring and tracking of activities that provide a more detailed view of network traffic flow. Alternatively, it will be a challenge for some IT departments to give up control over which devices may access their enterprise network. Another challenge will be to have the users doing configurations for network access, which adds human error to a crucial part of the process. The opportunities and challenges BYOD represents are real. Enterprises must make their network infrastructure BYOD ready to meet the onslaught.

Good question! There are lots of networks, so I’m sorry to say that it depends. Let me explain. The smallest computer-based networks are usually PANs or Personal Area Networks. They can connect a wireless keyboard, mouse, or other devices to a computer. You may find them wirelessly linking a printer to your computer. You may have noticed these all include wireless connections. A PAN most often uses wireless technologies like infrared and Bluetooth, so it is really a WPAN (Wireless Personal Area Network).

Your business has been hacked, leaving you with a persistent bot; now what? In this hour-long webinar, security expert David Willson will discuss ways you can eliminate the threat in an act of self-defense or defense of property. As new laws are explored, old ones amended, and solutions sought, you'll take a look at thinking outside the box to give the good guys the advantage-or at least a fighting chance.

For us wireless folks that aren’t stellar routing and switching guys, one of the most daunting network tasks is integrating our WLAN infrastructure with the existing wired infrastructure and its services. Understanding wired design topics is pretty fundamental to installing or managing any network, so it really should be on our priority list to spruce up those skills. To give you a nudge on your journey, let’s talk about DHCP for wireless clients.