Resource Library

You know you need to invest in training, but how do you get the best return on investment (ROI) from your training dollars? To help you make smart training decisions, we've put together this guide, which illustrates some alternative and little-known payment options, the types of discounts and promotions available with training and a suggested list of courses that give you excellent value.

Need to control the digits contained in the telephone number that enter or leave a gateway? Digit manipulation involves adding, subtracting, and changing telephone numbers. You can manipulate calling numbers, called numbers, and redirecting numbers, as well as the numbering plan and ISDN number type. Learn about the techniques that are applied to incoming or outgoing calls, or globally to all calls. You can also manipulate telephone numbers before or after a dial peer is matched.

Frequently, questions come up in the Cisco Contact Center Express classes I teach concerning the ability of the system to perform this or that task. In this blog post, I will cover some of the more popular questions I get during class.

Instructor John Harmon explains subnetting using binary numbers and decimal conversions.

Instructor John Harmon continues his explanation of subnetting by showing how subnet masks can be used to sub-divide networks.

You have spent money on software and hardware, implemented best practices, and believe you are secure, right? You may have overlooked the weakest link: your employee. Many breaches occur as a result of an employee mistakenly clicking on a link or visiting a site that allows a virus to be unknowingly downloaded, giving hackers access to your network. Today, a well-trained workforce is a necessity and may even be your most important cybersecurity tool. In this webinar, security expert David Willson will discuss how many breaches have occurred and are occurring, the tools and techniques hackers use to trick employees into clicking on links or opening attachments, and how to prevent such behavior.

In numerous Cisco classes, students learn about IPv4 and IPv6 address subnetting, complex subnetting, variable length subnet masking (VLSM), summarization, prefix routing, and address aggregation. These are valuable skills. In order to apply these skills efficiently, a network designer should possess one additional skill. Planning the IP address space for a Class A or B IPv4 address is necessary to apply the complex skills listed above properly. Complex subnetting, VLSM, and IP address summarization can be implemented simply and efficiently with proper planning.

John Barnes, Global Knowledge's Cisco Course Developer, discusses enhancements to our UCS Troubleshooting Boot Camp and suggestions for students in preparation for this course.

Meet Global Knowledge course director and lab topology architect Joey DeWiele, a specialist in Unified Communications. Joey will walk you through the benefits of our exclusive Cisco UC lab architecture - a more scalable and stable approach to the all-important labs featured in unified communications courses. Our labs feature upgraded hardware and software including Custom Lenovo T61 PCs, 7965 IP Phones, 3560 Switches and Call Manager 7. With our flexible UC architecture, students are able to view and experience the full lab architecture regardless of which Cisco UC course they are taking or the skill set they are seeking. The lab architecture features a realistic network with redundant environments that are made rich with multiple machines, pre-deployed tools with shortcuts, online documentation that is particular to individual pods, and multiple OS support for all virtual machines (Windows, Linux, VMware).

Global Knowledge instructor Doug Notini discusses the benefits of our FIREWALL 2.0 - Deploying Cisco ASA Firewall Solutions course.

Diane Teare, Global Knowledge's Cisco Course Director, discusses the advantages to taking our CCNA Boot Camp.

Global Knowledge Course Director and Lab Topology Architect Joey DeWiele, a specialist in Unified Communications, explains presence.

A video covering our Cisco Unified Communications courses - ACUCW1 & ACUCW2 - by Global Knowledge Course Director and Lab Topology Architect Joey DeWiele, a specialist in Unified Communications.

Global Knowledge Course Director and Lab Topology Architect Joey DeWiele, a specialist in Unified Communications, discusses Cisco Unity, Unity Connection & Unity Express.

Course director Jim Thomas explains how our custom labs, which utilize external hosts, ISR routers, and DMZ, provide a real-world environment for students.

Rodger Foster, our senior Cisco instructor, reviews how multiple gateways are used to provide redundancy in the network.

This is another topic of heated debate, and it changes from network to network, but I found a simple approach that works in most cases. Since I have four queues and four classes of traffic, I need to categorize my important traffic into four classes. Strictly for explanation purposes I took some liberty in defining four categories of traffic that are very effective in both large and small networks. These classes are: Real Time Protocol (RTP), Network Management (NetMgt), Business Critical, and the Default.

That depends on their configurations. For example: While it makes very good sense to include redundant physical links in a network, connecting switches in loops, without taking the appropriate measures, will cause havoc on a network. Without the correct measures, a switch floods broadcast frames out all of its ports, causing serious problems for the network devices. The main problem is a broadcast storm where broadcast frames are flooded through every switch until all available bandwidth is used and all network devices have more inbound frames than they can process.

As we discussed previously, Cisco created the Nexus Operating System (NX-OS) to power its next-generation data-center switching platform. While this new OS shares many similarities to the original IOS, there are some definite differences that you need to be aware of as you begin using it.

The most obvious difference is that hubs operate at Layer 1 of the OSI model while bridges and switches work with MAC addresses at Layer 2 of the OSI model. Hubs are really just multi-port repeaters. They ignore the content of an Ethernet frame and simply resend every frame they receive out every interface on the hub. The challenge is that the Ethernet frames will show up at every device attached to a hub instead of just the intended destination (a security gap), and inbound frames often collide with outbound frames (a performance issue).

Global Knowledge Course Director and Lab Topology Architect Joey DeWiele, a specialist in Unified Communications, explains the difference between Cisco's Call Manager Express & Call Manager.

This week we'll review the IPv4 Address Classes including subnet masks, examples of Class C, Class B, and Class A subnet masks, and planning IPv4 addresses.

Both technologies, Ethernet and FC, satisfied the two conditions at that time, but there was a catch. Read more. 

In the previous post, we discussed the need for VXLAN in the cloud along with the issues it solves. In this post, we will focus more on how VXLAN works.

Global Knowledge Course Director and Lab Topology Architect Joey DeWiele, a specialist in Unified Communications, explains QoS.

Configuring a wireless lab for study and testing capabilities is a bit more involved than you might think at first glance. Most of the requirements take place on the management devices, but the underlying switch infrastructure requires some preparations as well. The tasks involved are as follows:

Anyone who’s managed switches over the years knows that the Spanning-tree protocol (STP) is both the best and worst thing to ever happen to the data center at layer 2 of the OSI model. On the plus side, the Spanning-tree protocol is what first allowed us to create redundant paths within our switching infrastructure, making our data center much more resilient to outages than ever before. Anyone who’s experienced a “broadcast storm” knows the full value of Spanning-tree in the traditional switching environment. We’ve also seen many improvements in Spanning-tree over the years to make it work faster and more efficiently (i.e. Rapid Spanning-tree, Bridge Assurance, and many others).

Previously, I talked about the logical and physical steps to building a basic certification lab, concentrating mostly on the CCENT/CCNA Routing and Switching level. Once you have that set of certifications under your belt, there are several options for specialization. Each of these advanced technology tracks serve as methods of enhancing your professional skill set as follows:

The Cisco UCS is truly a “unified” architecture that integrates three major datacenter technologies into a single, coherent system: Computing Network Storage Instead of being simply the next generation of blade servers, the Cisco UCS is an innova­tive architecture designed from scratch to be highly scalable, efficient, and powerful with one-third less infrastructure than traditional blade servers.

Your business has been hacked, leaving you with a persistent bot; now what? In this hour-long webinar, security expert David Willson will discuss ways you can eliminate the threat in an act of self-defense or defense of property. As new laws are explored, old ones amended, and solutions sought, you'll take a look at thinking outside the box to give the good guys the advantage-or at least a fighting chance.

The official Cisco CCNP Security FIREWALL training course (as well as other documentation) recommends enabling the inspection of the Internet Control Message Protocol (ICMP), even though it’s disabled by default. The image below displays the recommended practice as configured in ASDM, but the curious student might wonder what the unchecked “ICMP Error” box is. That’s what I’ll focus on in this post.

In this post I’ll focus on a topic that’s mentioned in the Cisco FIREWALL training class but isn’t emphasized there or in the online Cisco ASA documentation. When configuring failover on a pair of ASA security appliances, a situation can arise in which network disruption occurs due to the secondary ASA in a failover pair becoming active first and then the primary comes online second. Both the documentation and the courseware point out that this causes the secondary (and active ASA) to swap its interface MAC addresses with those of the primary. Being naturally skeptical about this behavior, I decided to investigate. The rest of this post illustrates my confirmation of this phenomenon.

In this hour-long webinar, security expert and Global Knowledge instructor Phillip D. Shade will provide insight into the emerging network security science of network forensics analysis, a.k.a. security event analysis and reconstruction. Using case studies, you will examine the role of data retention in network forensics analysis, and you will learn about applying forensics analysis techniques to handle application-based attacks, VoIP call interception, and worms, bots, and viruses.

Although the GSS can be configured to be authoritative for an entire domain, e.g. cisco.com (option 1), the GSS is designed to be integrated into an existing traditional BIND-based or any DNS system. The GSS operates as an A-record DNS server for Hosted Domains (HD) for which it has been delegated authority from a higher-level name server, which generally would be a name server (NS) controlled by an Enterprise or ISP. In addition to A-record support, the GSS is able to proxy for other query types using NS Forwarding and a back-end name server such as BIND.

The Global Site Selector (GSS) leverages the Domain Name System (DNS) to provide clients with reliable and efficient content services. Domain to IP address mapping is performed with consideration for availability, location, and load of content servers. Using the GSS in combination with Cisco’s Content Services Switch (CSS), Cisco’s Catalyst 6000 Content Switching Module (CSM), or Cisco’s Application Control Engine (ACE) allows users to create Global Server Load Balancing (GSLB) networks.

In this hour-long webinar, Global Knowledge instructor John Barnes will guide you through implementing Cisco private VLANs. He will review VLANs and 802.1q, and he will discuss private VLAN fundamentals and operation, covering primary VLANs and secondary VLANs. He will cover VLAN mapping and discuss using private VLANs between multiple switches. He will also provide a use case example.

Global Knowledge Course Director and Lab Topology Architect Joey DeWiele, a specialist in Unified Communications, explains the difference between our Cisco Unified Communications courses - ACUCW1 & ACUCW2.

According to the OSI layer concept, routing, or best path selection, takes place on Layer 3 and is based on the logical address. In this post, we want to discuss some of the points in that statement.

According to the OSI layer concept, routing, or best path selection, takes place on Layer 3 and is based on the logical address. In this post, we want to discuss some of the points in that statement.

This week’s post highlights some of the features and implementation specifics regarding the Datagram Transport Layer Service (DTLS) protocol used in Virtual Private Networks with the Cisco AnyConnect^® SSL client. I’ll provide some background as well as some screenshots and supported CLI commands.