219 Results Found
Michael Scarborough and Ryan Ballmer, co-authors of Global Knowledge ITIL courseware, discuss the difference between ITIL Capability courses and ITIL Lifecycle courses.
Instructor Carol Kavalla talks about the advantages of taking a Cisco Data Center Unified Fabric Implementation class from Global Knowledge.
The short answer (and a common one in our industry): it depends. When comparing Cisco IOS with Juniper Junos, the decision to choose one over the other is difficult and often boils down to cost. Of course, there are other factors to consider.
With the advent of video use in our everyday communications, a number of questions commonly surface. One of them is the question of terminology. What's the difference between video conferencing and telepresence? What is meant by immersive technologies? Frankly, there is no one single right answer.
According to Cisco marketing, Dynamic Multipoint VPN (DMVPN) “will lower capital and operation expenses, simplifies branch communications, reduces deployment complexity, and improves business resiliency.” Okay. But what is it, really, and why should we care?
If you’re in IT, you’ve likely heard the saying, “In technology, the only thing constant is change itself,” and boy is that right! For technical companies, if you are not moving forward, then you’re falling behind. There is no such thing as standing still! A perfect example of this mindset is in Cisco’s evolution of video conferencing and telepresence.
Many companies are already using VoIP while incorporating video capabilities into their portfolio of services. One question that I am often asked is, “How can we ensure that the voice and video quality is good and consistent when using VoIP?”
In the spring of 2013, Cisco announced major updates to their Cisco Certified Network Associate (CCNA) curricula, including a new version of the CCNA Routing and Switching exam (200-120 CCNA). This paper provides a review of the CCNA Routing and Switching exam's critical concepts, as an aid to students preparing to pass the latest version of the CCNA Routing and Switching exam.
Cloud computing enables development teams to get applications into production faster. IT Service Management (ITSM) leaders must adopt new strategies and change existing processes or risk becoming a barrier to success. Cloud computing requires DevOps-the blending of development and operations with the goal of accelerating time-to-market and reducing time-to-value. The good news is that ITIL® is uniquely positioned to accelerate DevOps, but it requires changes to existing ITSM processes.
Nasser El-Batal will walk you through the most useful, recognized, and mandated ITSM best practices in the industry: TOGAF, COBIT and ITIL®. He will highlight the benefits of integrating them into a single implementation program to avoid project disaster. Discussions are focused on "Getting Your House in Order" and how to establish your own organization-specific business transformation program, while increasing your organization maturity.
RTMT provides a set of canned views of both system resources and application counters that provide you with a snapshot of your environment right out of the box. Read on to learn how you can make RTMT even more helpful by customizing it to show you different views of your resources and CUCM environment.
Cisco Access Control Lists (ACLs) are used in nearly all product lines for several purposes, including filtering packets (data traffic) as it crosses from an inbound port to an outbound port on a router or switch, defining classes of traffic, and restricting access to devices or services. Knowing how to design, configure, and troubleshoot ACLs is required for all network engineers working within a Cisco network.
Spanning Tree Protocol (STP) is dead, or at least it should be. It’s too slow to converge when there’s a change, and it causes issues with performance because there is only one forwarding path. It was developed in 1985 by Radia Perlman at Digital Equipment Corporation to allow for redundant paths within a Layer 2 topology, which was great in 1985. In fact, it was huge! So much so, that it was later standardized by the IEEE as 802.1D, and we’ve been living with it ever since.
In this hour-long webinar by Global Knowledge instructor and ITIL Expert Michael Scarborough, you will learn how to study for and succeed in passing ITIL Intermediate Exams. You will learn how to approach an ITIL Intermediate exam, the true/false approach and why it works and how to study for the ITIL Intermediate exams.
While the Internet uses IP addresses assigned by an Internet authority such as the American Registry for Internet Numbers (ARIN), there are too few of these numbers to uniquely identify the millions of computers and computing devices in the world. Therefore, most enterprises use private addresses which allow them to identify the aforementioned computers. Of course, these IP numbers cannot be allowed on the Internet because all private networks use the same ones so there would be vast overlapping of addresses, and the addresses are not compliant anyway. Therefore, it is necessary to change the identity of a private host to a legal public host. This process is called Network Address Translation (NAT) and may be implemented on Cisco firewall products and Cisco routers. The firewall device(s) at the Internet demarcation point is by far the more popular way to implement NAT, but routers are used in small offices or small-to-medium-sized networks in which a separate firewalling solution is not possible or affordable. The focus of this paper is on the router-based NAT solution.
The process of learning how to subnet IP addresses begins with understanding binary numbers and decimal conversions along with the basic structure of IPv4 addresses. This paper focuses on the mathematics of binary numbering and IP address structure.
Simulate the ITIL v3 Service Management Lifecycle with an interactive gaming experience.
While most organizations have not yet fully (or in many cases even partially) adopted cloud computing, the trend is growing in all but the smallest businesses.
Moving data from one networked device to another requires several different functions. Each function has its own protocol or protocols that define how it is accomplished. Also, the process of delivering data from one device to another can vary. The main factor in data delivery is determining whether the two devices are directly connected or remotely connected.
Moving data from one networked device to another requires several different functions. Each function has its own protocol or protocols that define how it is accomplished. Also, the process of delivering data from one device to another can vary. The main factor in data delivery is determining whether the two devices are directly connected or remotely connected.
Occasionally I am asked to configure the ability to block calls based on Caller ID. Prior to Cisco Unified Communications Manager (CUCM) v8, the only way to block these calls was to configure voice translation rules and profiles on the gateway receiving the calls. This has changed in CUCM v8 with the introduction of an additional parameter in translation patterns: Route Next Hop By Calling Party Number.
License provisioning has always been a bit of a challenge in the CUCM environment. Prior to CUCM v9.0, licensing was managed on a per-cluster basis with each cluster requiring its own license files that were tied to the media access control (MAC) address of the cluster’s publisher. This approach to license management was limiting in the fact that one cluster might have unused licenses while another cluster may be at its limit and sharing between clusters was not possible.
Border Gateway Protocol (BGP) is a fascinating protocol because there are a lot of things that can be done with BGP. However, there has always been an issue with BGP, which is convergence (the time the network or protocol takes to accept change). BGP was designed for scale, not speed, so it’s something that we’ve had to tolerate from its inception.
Michael Scarborough and Ryan Ballmer, co-authors of Global Knowledge ITIL courseware, discuss how to become an ITIL expert.
For smaller companies, configuring a dial plan to account for variations in dialed numbers is often not a problem. However, companies that are larger and more global in nature encounter a number of issues when designing their dial plan approach.
Where should you apply the CSS, and why are there two places to apply it? One approach is to pick one of the parameters and apply the permissions there. Quite often, an administrator will pick the phone-level CSS and configure it there so that it applies to all calls made from all lines. The goal is to specify what partitions are allowed to be called.
As I’ve stated before, I like Border Gateway Protocol (BGP). I think it’s an interesting protocol, and yes — it’s complicated, but I guess that part of why I like it. There are a lot of knobs to tweak in BGP, maybe too many, but that’s another post. Anyway, we are now running BGP version 4 and it has had extensions written that support more than just IPv4 unicast routing. We now have IPv4 multicast, IPv6 unicast and multicast, VPNv4, VPNv6, and a few others.
Cisco provides a wide array of connectivity and isolation tools within the datacenter. This white paper addresses Virtual Routing and Forwarding (VRF), which is a Layer 3 isolation mechanism for routing protocols.
You will learn how many organizations approach change management as compared to how best practices dictate that change management should work. Global Knowledge instructor and ITIL Expert Michael Scarborough will fill you in on the purpose of change management and the difference between change management and change tickets. He will provide a high-level guide for establishing a change management process that uses real-world examples as its basis.
What is PBR? Policy-Based Routin (PBR) is the process of using a route map to match on something more than the destination and then defining the path out of the router based on those conditions. PBR could match on destination only, but typically we would match on more. PBR is considered to be an exception to the RIB and is looked at before examining the RIB.
Now that we are moving towards IPv6, the logical move would be to also run OSPF for that protocol suite, which makes sense and reduces the learning curve for implementation and support. But, that would mean that you have to run two OSPF processes — one for IPv4 unicast and one for IPv6 unicast. That means two sets of policies have to be applied, including security for OSPF itself. Running OSPFv3 for both IPv4 and IPv6 reduces the number routing protocols and the configuration that goes with that. It makes it easier to implement policy in a consistent way for both protocol suites.
Learn the ITIL® concepts of accountability, boundaries, and consistency (the ABCs) and discover how ITIL helps establish, manage, and maintain the ABCs.
In this hour-long webinar, Global Knowledge instructor and ITIL Expert Michael Scarborough will share his knowledge and expertise on various aspects of incident management and problem management processes. He will help you understand the difference between incidents and problems and between incident and problem management, providing examples from his own experience to drive the concepts home. Michael will also provide an overview of who performs various incident and problem management activities in an organization.
While there are differences between the IP Multicast configuration in the IOS and the Nexus OS, the Protocol Independent Multicast (PIM) protocol remains fundamentally the same. If you feel comfortable configuring Multicast in the IOS, you should be able to acclimate fairly easily to the changes in the Nexus OS.
Multicast Sparse Mode and its derivatives are supported in the Nexus OS. This white paper explains how it has been implemented in the Nexus platform to provide optimum performance in both virtual PortChannel and FabricPath environments.
Like it or not, Internet of Things (IoT) is upon us. There are a number of factors that will impact its adoption rate, and the inevitable privacy (or lack of) discussions will likely happen sooner than later. This is going to change the world as we know it, in many cases for the better. But we will need to keep an eye on the extent to which it invades our personal lives if it is going to be the positive force it has the potential to be.
This paper covers the configuration of IP Multicast with Multiprotocol Label Switching (MPLS) including the basics of Multicast with the Group Encrypted Transport VPN (GETVPN).
A Dynamic Multipoint Virtual Private Network (DMVPN) can be used with other networks like Multiprotocol Label Switching (MPLS), but streaming multicast is accomplished quite well using "Default" and "Data" Multicast Distribution Trees (MDTs) with MPLS.
Cisco Unified Computing Solution (UCS) is a very popular and powerful solution. Cisco continues to provide updated UCS management options for the full range of data center installations.
The first big push toward implementation of IPv6 was mobile devices. Now, one of the driving forces is the Internet of Things. As the name implies, this means everything, including machine to machine communication (M2M).