Resource Library

Many companies are already using VoIP while incorporating video capabilities into their portfolio of services. One question that I am often asked is, “How can we ensure that the voice and video quality is good and consistent when using VoIP?”

Every second of every day, data is being sent and received. Billions of data packets are processed by your company’s network every day. In fact, you received dozens of packets just to read this article, but the vast majority of us have no idea how this works. People have no clue as to what goes on behind the scenes to ensure data actually gets to the right device.

Precision Time Protocol (PTP) is a protocol designed to go beyond what Network Time Protocol (NTP) can offer relative to accuracy. PTP is IEEE standard 1588 that can give local computing systems accuracy within the sub-microsecond range (such as microsecond, nanosecond or picoseconds) whereas NTP is within milliseconds or longer. PTP standard was first released in 2002 and known as 1588-2002. In 2008, the IEEE released a revised standard for PTP, known as 1588-2008, that improved the accuracy and precision of the protocol. It is also known as PTPv2 and is not backward compatible with the older version. PTP was developed for packet based network for control and measurement systems.

Configuring a wireless lab for study and testing capabilities is a bit more involved than you might think at first glance. Most of the requirements take place on the management devices, but the underlying switch infrastructure requires some preparations as well. The tasks involved are as follows:

The purpose of Interior Routing Protocols (IGP), and routing protocols more generally, is to advertise the existence of destination networks. All protocols then have some method of picking what they would consider to be the best path and maintain the information. By...

Previously, I talked about the logical and physical steps to building a basic certification lab, concentrating mostly on the CCENT/CCNA Routing and Switching level. Once you have that set of certifications under your belt, there are several options for specialization. Each of these advanced technology tracks serve as methods of enhancing your professional skill set as follows:

One size does not always fit all. At times there’s a need to run more than one routing protocol and have more than one routing domain: multivendor shops, migration from one protocol to another, scalability issues of a single protocol, political or personal preference, production versus test networks, mergers, and acquisitions.

Border Gateway Protocol (BGP) is a fascinating protocol because there are a lot of things that can be done with BGP. However, there has always been an issue with BGP, which is convergence (the time the network or protocol takes to accept change). BGP was designed for scale, not speed, so it’s something that we’ve had to tolerate from its inception.

License provisioning has always been a bit of a challenge in the CUCM environment. Prior to CUCM v9.0, licensing was managed on a per-cluster basis with each cluster requiring its own license files that were tied to the media access control (MAC) address of the cluster’s publisher. This approach to license management was limiting in the fact that one cluster might have unused licenses while another cluster may be at its limit and sharing between clusters was not possible.

With Multiprotocol Label Switching (MPLS) as popular as it is in the provider space and private MPLS clouds for larger enterprise, we needed some tools to help troubleshoot and maintain these networks. With the providers in mind, the normal ping or traceroute may not be enough.

Rodger Foster, our senior Cisco instructor, reviews how multiple gateways are used to provide redundancy in the network.

The official Cisco CCNP Security FIREWALL training course (as well as other documentation) recommends enabling the inspection of the Internet Control Message Protocol (ICMP), even though it’s disabled by default. The image below displays the recommended practice as configured in ASDM, but the curious student might wonder what the unchecked “ICMP Error” box is. That’s what I’ll focus on in this post.

Cisco provides a wide array of connectivity and isolation tools within the datacenter. This white paper addresses Virtual Routing and Forwarding (VRF), which is a Layer 3 isolation mechanism for routing protocols.

When the hostname.domainname associated with my Small Office Home Office (SOHO) failed to update after a power outage, and a new DHCP-assigned external address was assigned to my router, I was reminded of the need for Dynamic DNS. This article will explore the implem...

None of us have much time to waste, so what can you do when your environment changes quickly and you need to come up to speed on a device that you have never seen before? You find the quickest way to bring yourself up to speed. Some of you will have experience with other vendors’ equipment, and some of you will not have much experience at all; therefore, we will focus on topics that will get your feet wet the quickest and have you talking Junos in no time.

The first big push toward implementation of IPv6 was mobile devices. Now, one of the driving forces is the Internet of Things. As the name implies, this means everything, including machine to machine communication (M2M).

Cisco Internetwork Operating System (IOS) has been around since a little after the inception of Cisco Systems as a company. In 1984, Len and Sandy Bosack from Stanford University founded Cisco Systems with a small commercial gateway server. The first Cisco router that I touched was an Advanced Gateway Server (AGS), which was the first marketed product of the company. After this came the Mid-Range Gateway Server (MGS), the Compact Gateway Server (CGS) and later the Integrated Gateway Server (IGS) and AGS+. The first version of IOS that I touched was 8.2(7). The operating system was based on a Unix-based system and was designed as a monolithic operating system, meaning that processes are stacked and interrelated.

Regardless of your vendor preference or your experience on the Juniper JUNOS CLI, assuming you have a point of reference to another vendor, your first thought when experiencing JUNOS is, “I have been here before.” The CLI is familiar, convenient, and polished. The similarities between JUNOS CLI and another CLI such as Cisco’s IOS are not what I want to focus on here however; it is their differences I want to focus on. But first, when you connect to a JUNOS powered device and access Operational Mode (see Brad Wilson’s blog post Introduction to Juniper Junos), it looks very much like the User EXEC Mode in IOS. In fact, there are a lot of JUNOS commands that are very much like the IOS User EXEC Mode commands.

Routers and switches make up the bulk of the network infrastructure and are vulnerable to attack. In a previous article, I talked about some of the different ways of hardening your network devices. In this blog, I’d like to specifically examine the routing protocols used on the major Cisco network operating systems.

An quick fundamental overview of layer two devices.   To learn more about this and similar topics, enroll in our exclusive Understanding Networking Fundamentals course.    

According to the Global Knowledge IT Skills and Salary Report, women make up 16% of the tech workforce, and an even smaller percentage (8%) are at the senior or executive level. Here’s an overview of the most popular and most pursued certifications by women in tech.

While cybersecurity remains the most popular certification category in our IT Skills and Salary Report, foundational-level certifications highlight our list of the most popular IT certifications of 2020. 

While there are differences between the IP Multicast configuration in the IOS and the Nexus OS, the Protocol Independent Multicast (PIM) protocol remains fundamentally the same. If you feel comfortable configuring Multicast in the IOS, you should be able to acclimate fairly easily to the changes in the Nexus OS.

Multicast Sparse Mode and its derivatives are supported in the Nexus OS. This white paper explains how it has been implemented in the Nexus platform to provide optimum performance in both virtual PortChannel and FabricPath environments.

ASA and PIX software version 7.0 introduced the configuration command nat-control which didn’t exist in previous versions of code. Although training course material for both the SNAF (Securing Networks with ASA Fundamentals) and SNAA (Securing Networks with ASA Advan...

Find out which OSI layer is concerned with reliable end-to-end delivery of data - and more. Get answers to your OSI reference model and network layer questions here.

Find out what changes have been made and how you now have multiple paths to success with the help of Cisco Certification 2020! The new set of certification exams launched on 24th February. It provides a common language for software developers and networkers to bring the two together. The certification programme will also open-up a brand new horizon of job roles and skill sets that are already starting to emerge. Announced at last year’s Cisco Live event in San Diego, the new DevNet certifications aim to help professionals combine infrastructure expertise with programming to take advantage of the possibilities of intent-based networking. Changes to the Cisco certification programme also include new training and certifications in five key technology tracks. In the traditional Cisco network programme, the certifications range from the associate level to the expert level. The new certification involves a DevNet Associate, a DevNet Professional and soon there will also be a DevNet Expert certification. In this one hour webinar, John Berry discusses what’s new in Cisco Certification, what the professional of the future should look like and how to prepare technology professionals for new roles as a network automation developer.

Looking ahead at new and emerging certifications provides insight into the areas deemed valuable in the IT industry. If you are an early adopter or in a position where you need to show that you have the bleeding-edge expertise of a technology, this list of recent and upcoming certifications is for you. 

As cybersecurity threats continue to be a top concern facing organizations today, the Information Technology (IT) Governance team must stay abreast in assuring that the organization is protected. The IT Governance team must continually evaluate the risks to the organization and put in place Processes, Procedures and Technologies to protect the assets of the organization.  

Now that we are moving towards IPv6, the logical move would be to also run OSPF for that protocol suite, which makes sense and reduces the learning curve for implementation and support. But, that would mean that you have to run two OSPF processes — one for IPv4 unicast and one for IPv6 unicast. That means two sets of policies have to be applied, including security for OSPF itself. Running OSPFv3 for both IPv4 and IPv6 reduces the number routing protocols and the configuration that goes with that. It makes it easier to implement policy in a consistent way for both protocol suites.

A video covering our Cisco Unified Communications courses - ACUCW1 & ACUCW2 - by Global Knowledge Course Director and Lab Topology Architect Joey DeWiele, a specialist in Unified Communications.

Understand the Cisco Collaboration technology and certification training portfolio. This overview will cover the courses needed to prepare for the CCNA Collaboration and CCNP Collaboration certifications. You will also learn about recommended skills-focused courses covering basic and advanced Unified Communications Manager administration.

Understand the Cisco Security technology and certification training portfolio. This overview will cover the courses needed to prepare for the CCNA Security and CCNP Security certifications. You will also learn about recommended skills-focused courses covering SourceFire technologies, the ASA security solution, and the ISE access control and authentication platform.

The Global Site Selector (GSS) leverages the Domain Name System (DNS) to provide clients with reliable and efficient content services. Domain to IP address mapping is performed with consideration for availability, location, and load of content servers. Using the GSS in combination with Cisco’s Content Services Switch (CSS), Cisco’s Catalyst 6000 Content Switching Module (CSM), or Cisco’s Application Control Engine (ACE) allows users to create Global Server Load Balancing (GSLB) networks.

Policy-based routing (PBR) provides network administrators with agility and flexibility to better manage traffic. With carefully architected policies, you can optimize how segments of your network process data, as well as how bandwidth is managed for business-critical applications.

What is PBR? Policy-Based Routin (PBR) is the process of using a route map to match on something more than the destination and then defining the path out of the router based on those conditions. PBR could match on destination only, but typically we would match on more. PBR is considered to be an exception to the RIB and is looked at before examining the RIB.

Global Knowledge Course Director and Lab Topology Architect Joey DeWiele, a specialist in Unified Communications, explains presence.

In this hour-long webinar, Global Knowledge instructor John Barnes will guide you through implementing Cisco private VLANs. He will review VLANs and 802.1q, and he will discuss private VLAN fundamentals and operation, covering primary VLANs and secondary VLANs. He will cover VLAN mapping and discuss using private VLANs between multiple switches. He will also provide a use case example.

Learn how to calculate QOS Bandwidth Percent vs Bandwidth Remaining Percent using a Cisco-defined formula. Read on for answers and examples from the experts at Global Knowledge!

In the previous discussion on QoS, the uses of Per-Hop Behaviors DiffServ to mark packets were identified and discussed in detail. Today’s post will identify the mechanisms to implement QoS. The five main categories of tools used to implement QoS are as follows. Cl...

According to the OSI layer concept, routing, or best path selection, takes place on Layer 3 and is based on the logical address. In this post, we want to discuss some of the points in that statement.

According to the OSI layer concept, routing, or best path selection, takes place on Layer 3 and is based on the logical address. In this post, we want to discuss some of the points in that statement.

Internet Protocol (IP) routing protocols have one primary goal: to fill the IP routing table with the current best routes it can find. The goal is simple, but the process and options can be complicated. Routing protocols define various ways that routers chat among th...

Take charge of your Cisco network devices with Python programming As a network engineer, you might wonder why there’s any need for you to learn Python. After all, network automation is clearly where the industry is headed. And there are many tools that allow yo...

Certifications are the most common way in IT to prove you have the skills to solve various technical and business challenges. In this article, I'll address a range of skill sets. For each certification listed, I've included what the certification measures, the requirements to obtain it.

Subnetting is a complicated topic that has confused students for a very long time. However, subnetting is an important topic for many different certifications with various vendors, including Cisco. In the real world environment, people are used to just punching in the numbers in many of the free subnet calculators that are readily available on the internet. For exam purposes, you still have to do this in a very fast manner since many exams are time-based and you don't have the luxury of spending those precious minutes on any single question. This Cisco training whitepaper will solve some of those age-old and complicated subnetting puzzles.

You may have noticed that it’s the dynamic routing protocols that get all the glory. Since I like rooting (routing?) for the underdog, let’s talk about static routes! As you may recall, a router has three methods for learning a route. A route can appear in the routi...

Instructor John Harmon explains subnetting using binary numbers and decimal conversions.

Instructor John Harmon continues his explanation of subnetting by showing how subnet masks can be used to sub-divide networks.

Switches play a vital role in moving data from one device to another. Specifically, switches greatly improve network performance, compared to hubs, by providing dedicated bandwidth to each end device, supporting full-duplex connectivity, utilizing the MAC address table to make forwarding decisions, and utilizing ASICs and CAM tables to increase the rate at which frames can be processed.

Telepresence is a set of technologies that allow video conferencing in such a way that the user feels as if they are actually at the remote site. Cisco sells a variety of platforms in the telepresence space supporting up to three 65” high definition video displays,...

As IT departments struggle with skills gaps and businesses attempt to recovery economically from the COVID-19 pandemic, these 10 IT skills are essential to drive success. Job roles in these areas pay well, but decision-makers are struggling to find qualified candidates. If you’re looking to make an IT skills investment or start a new career path this year, these are the areas to consider.

While the Internet uses IP addresses assigned by an Internet authority such as the American Registry for Internet Numbers (ARIN), there are too few of these numbers to uniquely identify the millions of computers and computing devices in the world. Therefore, most enterprises use private addresses which allow them to identify the aforementioned computers. Of course, these IP numbers cannot be allowed on the Internet because all private networks use the same ones so there would be vast overlapping of addresses, and the addresses are not compliant anyway. Therefore, it is necessary to change the identity of a private host to a legal public host. This process is called Network Address Translation (NAT) and may be implemented on Cisco firewall products and Cisco routers. The firewall device(s) at the Internet demarcation point is by far the more popular way to implement NAT, but routers are used in small offices or small-to-medium-sized networks in which a separate firewalling solution is not possible or affordable. The focus of this paper is on the router-based NAT solution.

Cisco Access Control Lists (ACLs) are used in nearly all product lines for several purposes, including filtering packets (data traffic) as it crosses from an inbound port to an outbound port on a router or switch, defining classes of traffic, and restricting access to devices or services. Knowing how to design, configure, and troubleshoot ACLs is required for all network engineers working within a Cisco network.

Like it or not, Internet of Things (IoT) is upon us. There are a number of factors that will impact its adoption rate, and the inevitable privacy (or lack of) discussions will likely happen sooner than later. This is going to change the world as we know it, in many cases for the better. But we will need to keep an eye on the extent to which it invades our personal lives if it is going to be the positive force it has the potential to be.

Moving data from one networked device to another requires several different functions. Each function has its own protocol or protocols that define how it is accomplished. Also, the process of delivering data from one device to another can vary. The main factor in data delivery is determining whether the two devices are directly connected or remotely connected.

Moving data from one networked device to another requires several different functions. Each function has its own protocol or protocols that define how it is accomplished. Also, the process of delivering data from one device to another can vary. The main factor in data delivery is determining whether the two devices are directly connected or remotely connected.

In 2013, Cisco released their Software Defined Networking (SDN) solution for the data center known as Cisco Application Centric Infrastructure (ACI). For many years, the networking industry has been asking for an approach to configuring networking devices more efficiently than having to individually configure each and every router and switch.

Interior Gateway Routing Protocol (IGRP) was a Cisco-proprietary Distance-Vector (D-V) classful routing protocol - basically an improved version of RIPv1. Like other D-V protocols, each IGRP router periodically flooded its routing table, but it differed from RIP in two ways. First, RIP’s advertisement interval was thirty seconds but IGRP’s was ninety seconds, which allowed IGRP to scale to larger networks than RIP. Second, RIP used a simple hop count metric, but IGRP’s more sophisticated metric was based on minimum path bandwidth and total path delay, with options to include link reliability and interface loading.

In light of the recent tragic events in Haiti, it might be a good time to review some of the requirements for a well designed Uninterruptible Power Source (UPS) to be included in all of our critical network installations. As a CCNA, we are called upon to help maintai...

If you’re in IT, you’ve likely heard the saying, “In technology, the only thing constant is change itself,” and boy is that right! For technical companies, if you are not moving forward, then you’re falling behind. There is no such thing as standing still! A perfect example of this mindset is in Cisco’s evolution of video conferencing and telepresence.

One command that had a fairly long history first with the PIX Firewall and now the ASA is the shun command. In this post we’ll examine this command’s history, why it’s useful, and its new-found resurgence in threat detection implementation.

I recently came across an opportunity to use a relatively new feature in Cisco Unified Communications Manager (CUCM). Suppose you are the telecom administrator at a community hospital. During business hours, the Facilities Department is staffed and team members simpl...

IT is a very fast changing industry – what is hot today may be a tiny niche market in only a few years and lesser known things may turn out to be huge trends. That having been said, there are many certifications that will be around for a long time. However, this does not imply that recertification and/or continuing education credits are not required to maintain certification. Predicting the future is always challenging, including in IT, but these certifications are good bets.

Discover the top 5 highest-paying and popular Cisco certifications from the IT Skills and Salary Report. Learn how to get certified and unlock IT career opportunities.

Managers are in dire need of cybersecurity professionals with specific skills. If you’re looking to advance your career, or transfer into the cyber field, now is the time to get certified.

Global Knowledge subject matter experts predict the top trends for 2020 in IT training, Microsoft, Cisco, AWS, cybersecurity and more.

One aspect of Unified Communications is this concept of trunk groups.  I will discuss what they are, what benefit they can provide and how to configure them for Cisco gateways. First of all the official definition of a trunk group is “A group of trunks serving the s...

Last blog we looked at how we can use Trunk groups to ease the configuration of dial-peers and digit manipulation using analog FXO ports for an E911 solution. Now let’s take a look on how it can be used for T-1 CAS configurations and ISDN channel selection. The firs...

John Barnes, Global Knowledge's Cisco Course Developer, discusses enhancements to our UCS Troubleshooting Boot Camp and suggestions for students in preparation for this course.

Where should you apply the CSS, and why are there two places to apply it? One approach is to pick one of the parameters and apply the permissions there. Quite often, an administrator will pick the phone-level CSS and configure it there so that it applies to all calls made from all lines. The goal is to specify what partitions are allowed to be called. 

The responsibility for securing organizational data has spread beyond the traditional IT professional. While there are more diverse security solutions, there are more diverse and sophisticated security threats. Security awareness and training is essential for everyone within an organization. Learn how Cisco has continued to evolve its security solutions and training.

Next Hop Resolution Protocol enables businesses to have a way for next-hop servers and next-hop clients to communicate with each other directly, bypassing a central hub and preventing potential bottlenecks.

So far, in our discussion of Router Information Protocol (RIP), we’ve discussed the basics and also verified and reviewed RIP version1. We stated that RIP version 1 is a classful routing protocol that used FLSM and sent it routing updates without the subnet mask.  In...

Occasionally as I'm teaching a Cisco training class, I get an idea for a blog post and it happened again this week. The Securing Networks with ASA Fundamentals curriculum is mostly based on the Adaptive Security Device Manager (ASDM). While the class describes the us...

RTMT provides a set of canned views of both system resources and application counters that provide you with a snapshot of your environment right out of the box. Read on to learn how you can make RTMT even more helpful by customizing it to show you different views of your resources and CUCM environment.

When properly utilized, VLANs and trunks provide flexibility, stability and ease of troubleshooting. This paper provides technical details about VLANs and trunks, along with design options at a basic to intermediate level. Recommendations and commands are included throughout.

There are many interesting new issues that seem to have come with the addition of voice and video to the data network. Most of the engineers that are now working on VoIP networks come from either a pure data network background or a traditional phone system background...

There are some common misconceptions on the part of some of my students as to how VPN sessions are established from either a remote location or remote user to the ASA firewall. In particular, a “gray area” seems to be when the attributes from the tunnel group are app...

In the previous post, we discussed the need for VXLAN in the cloud along with the issues it solves. In this post, we will focus more on how VXLAN works.