Checkout

Cart () Loading...

    • Quantity:
    • Delivery:
    • Dates:
    • Location:

    $

Resource Library

Show Filters
Result Filters:

67 Results Found

Results per page: 10 40 80

Using Countermeasures to Ensure Risk Management

Article | July 03, 2013

While the last few years have brought about many great advances in IT and network technology security and risk management have a critical point. There is a host of new concerns the IT security manager must be concerned with, including social networking, mobile, cloud, and information sharing. This has unleashed a new wave of change and potential risk. Risk management is required to deal with these emerging technologies and should provide the rationale for all information security activities within the organization. You can think of risk management as the process of ensuring that the impact of threats and exploited vulnerabilities is within acceptable limits at an acceptable cost. Risk management requires the use of countermeasures. Countermeasures can include any process that serves to reduce threats or vulnerabilities.

Risk Management with RSA’s Archer GRC Framework

Article | Dec. 05, 2012

Risk is something we deal with on a daily basis. Living in New Jersey and having the occasional storm, I’ve recently performed my own risk assessment determining the value of certain assets and activities and made a decision on what I was willing to spend to reduce risk to what I perceived as an acceptable level. My management of risk was a rather simple case. Sure, in my revised business continuity plan for my home, I’ll make sure that I have more D cell batteries, have my garage door adjusted so it opens manually again, more food I can heat on a stove and that doesn’t rely on refrigeration, and finally I’ll consider a whole house gas generator that uses natural gas, which has always been available to power critical systems like the sump pump in my basement. What if, however, I was a really large business? One with lots of components and interdependencies that require a tight integration in order to succeed? How and where can a large volume of information necessary to management, business continuity, and disaster recovery be correlated and communicated to those individuals who, because of their roles and responsibilities, need to make the critical decisions regarding the management of risk?

What Happens If I Have More Than One Switch With Redundant Links?

Article | Oct. 11, 2012

That depends on their configurations. For example: While it makes very good sense to include redundant physical links in a network, connecting switches in loops, without taking the appropriate measures, will cause havoc on a network. Without the correct measures, a switch floods broadcast frames out all of its ports, causing serious problems for the network devices. The main problem is a broadcast storm where broadcast frames are flooded through every switch until all available bandwidth is used and all network devices have more inbound frames than they can process.

Data Center Basics: the Differences Between IOS and NX-OS

Article | Sep. 04, 2012

As we discussed previously, Cisco created the Nexus Operating System (NX-OS) to power its next-generation data-center switching platform. While this new OS shares many similarities to the original IOS, there are some definite differences that you need to be aware of as you begin using it.

What is Twisted Pair and Does It Work?

Article | June 12, 2012

“Twisted Pair” is another way to identify a network cabling solution that’s also called Unshielded Twisted Pair (UTP) and was invented by Alexander Graham Bell in 1881. Indoor business telephone applications use them in 25-pair bundles. In homes, they were down to four wires, but in networking we use them in 8-wire cables. By twisting the pairs at different rates (twists per foot), cable manufacturers can reduce the electromagnetic pulses coming from the cable while improving the cable’s ability to reject common electronic noise from the environment.

Cisco UCS: Spanning-Tree Need Not Apply!

Article | Feb. 15, 2012

Anyone who’s managed switches over the years knows that the Spanning-tree protocol (STP) is both the best and worst thing to ever happen to the data center at layer 2 of the OSI model. On the plus side, the Spanning-tree protocol is what first allowed us to create redundant paths within our switching infrastructure, making our data center much more resilient to outages than ever before. Anyone who’s experienced a “broadcast storm” knows the full value of Spanning-tree in the traditional switching environment. We’ve also seen many improvements in Spanning-tree over the years to make it work faster and more efficiently (i.e. Rapid Spanning-tree, Bridge Assurance, and many others).

What is the Cisco UCS Manager?

Article | Feb. 01, 2012

The Cisco UCS is truly a “unified” architecture that integrates three major datacenter technologies into a single, coherent system: Computing Network Storage Instead of being simply the next generation of blade servers, the Cisco UCS is an innova­tive architecture designed from scratch to be highly scalable, efficient, and powerful with one-third less infrastructure than traditional blade servers.

DHCP for Wireless LAN Clients

Article | Jan. 31, 2012

For us wireless folks that aren’t stellar routing and switching guys, one of the most daunting network tasks is integrating our WLAN infrastructure with the existing wired infrastructure and its services. Understanding wired design topics is pretty fundamental to installing or managing any network, so it really should be on our priority list to spruce up those skills. To give you a nudge on your journey, let’s talk about DHCP for wireless clients.

The 5 Phases of Hacking: Covering Your Tracks

Article | Aug. 30, 2011

An attacker needs to destroy evidence of his presence and activities for several reasons like being able to maintain access and evade detection (and the resulting punishment). Erasing evidence of a compromise is a requirement for any attacker who wants to remain obscure and evade trace back. This usually starts with erasing the contaminated logins and any possible error messages that may have been generated from the attack process.

Are Production Server Reboots Standard Changes?

Article | April 27, 2011

I attended a meeting this week with a customer of mine and a potential new vendor. The new vendor was there to pitch his configuration and setup service offerings for a specific ITSM toolset. My customer has already had one bad experience with an ITSM tool configuration vendor who promised one thing and delivered much less. He ended up with a tool that’s minimally used and not configured to match his business needs. He’s looking for a vendor that can understand his business needs and priorities and quickly help him get his tool configured and working in a short time frame. Then the topic of standard changes came up. My customer asked for examples of standard changes. The vendor responded, “Server reboots are an example of standard changes.”