170 Results Found
Global Knowledge Course Director and Lab Topology Architect Joey DeWiele, a specialist in Unified Communications, explains the difference between Cisco's Call Manager Express & Call Manager.
This week we'll review the IPv4 Address Classes including subnet masks, examples of Class C, Class B, and Class A subnet masks, and planning IPv4 addresses.
Both technologies, Ethernet and FC, satisfied the two conditions at that time, but there was a catch. Read more.
In the previous post, we discussed the need for VXLAN in the cloud along with the issues it solves. In this post, we will focus more on how VXLAN works.
Global Knowledge Course Director and Lab Topology Architect Joey DeWiele, a specialist in Unified Communications, explains QoS.
Configuring a wireless lab for study and testing capabilities is a bit more involved than you might think at first glance. Most of the requirements take place on the management devices, but the underlying switch infrastructure requires some preparations as well. The tasks involved are as follows:
Anyone who’s managed switches over the years knows that the Spanning-tree protocol (STP) is both the best and worst thing to ever happen to the data center at layer 2 of the OSI model. On the plus side, the Spanning-tree protocol is what first allowed us to create redundant paths within our switching infrastructure, making our data center much more resilient to outages than ever before. Anyone who’s experienced a “broadcast storm” knows the full value of Spanning-tree in the traditional switching environment. We’ve also seen many improvements in Spanning-tree over the years to make it work faster and more efficiently (i.e. Rapid Spanning-tree, Bridge Assurance, and many others).
Previously, I talked about the logical and physical steps to building a basic certification lab, concentrating mostly on the CCENT/CCNA Routing and Switching level. Once you have that set of certifications under your belt, there are several options for specialization. Each of these advanced technology tracks serve as methods of enhancing your professional skill set as follows:
The Cisco UCS is truly a “unified” architecture that integrates three major datacenter technologies into a single, coherent system: Computing Network Storage Instead of being simply the next generation of blade servers, the Cisco UCS is an innovative architecture designed from scratch to be highly scalable, efficient, and powerful with one-third less infrastructure than traditional blade servers.
The official Cisco CCNP Security FIREWALL training course (as well as other documentation) recommends enabling the inspection of the Internet Control Message Protocol (ICMP), even though it’s disabled by default. The image below displays the recommended practice as configured in ASDM, but the curious student might wonder what the unchecked “ICMP Error” box is. That’s what I’ll focus on in this post.
In this post I’ll focus on a topic that’s mentioned in the Cisco FIREWALL training class but isn’t emphasized there or in the online Cisco ASA documentation. When configuring failover on a pair of ASA security appliances, a situation can arise in which network disruption occurs due to the secondary ASA in a failover pair becoming active first and then the primary comes online second. Both the documentation and the courseware point out that this causes the secondary (and active ASA) to swap its interface MAC addresses with those of the primary. Being naturally skeptical about this behavior, I decided to investigate. The rest of this post illustrates my confirmation of this phenomenon.
Although the GSS can be configured to be authoritative for an entire domain, e.g. cisco.com (option 1), the GSS is designed to be integrated into an existing traditional BIND-based or any DNS system. The GSS operates as an A-record DNS server for Hosted Domains (HD) for which it has been delegated authority from a higher-level name server, which generally would be a name server (NS) controlled by an Enterprise or ISP. In addition to A-record support, the GSS is able to proxy for other query types using NS Forwarding and a back-end name server such as BIND.
The Global Site Selector (GSS) leverages the Domain Name System (DNS) to provide clients with reliable and efficient content services. Domain to IP address mapping is performed with consideration for availability, location, and load of content servers. Using the GSS in combination with Cisco’s Content Services Switch (CSS), Cisco’s Catalyst 6000 Content Switching Module (CSM), or Cisco’s Application Control Engine (ACE) allows users to create Global Server Load Balancing (GSLB) networks.
In this hour-long webinar, Global Knowledge instructor John Barnes will guide you through implementing Cisco private VLANs. He will review VLANs and 802.1q, and he will discuss private VLAN fundamentals and operation, covering primary VLANs and secondary VLANs. He will cover VLAN mapping and discuss using private VLANs between multiple switches. He will also provide a use case example.
Global Knowledge Course Director and Lab Topology Architect Joey DeWiele, a specialist in Unified Communications, explains the difference between our Cisco Unified Communications courses - ACUCW1 & ACUCW2.
According to the OSI layer concept, routing, or best path selection, takes place on Layer 3 and is based on the logical address. In this post, we want to discuss some of the points in that statement.
According to the OSI layer concept, routing, or best path selection, takes place on Layer 3 and is based on the logical address. In this post, we want to discuss some of the points in that statement.
This week’s post highlights some of the features and implementation specifics regarding the Datagram Transport Layer Service (DTLS) protocol used in Virtual Private Networks with the Cisco AnyConnect® SSL client. I’ll provide some background as well as some screenshots and supported CLI commands.
In this webinar, you will examine the need for IPv6 and whether it's possible to survive on IPv6 alone. You will learn ways to phase in IPv6 and how to successfully migrate to IPv6.
One command that had a fairly long history first with the PIX Firewall and now the ASA is the shun command. In this post we’ll examine this command’s history, why it’s useful, and its new-found resurgence in threat detection implementation.
Interior Gateway Routing Protocol (IGRP) was a Cisco-proprietary Distance-Vector (D-V) classful routing protocol - basically an improved version of RIPv1. Like other D-V protocols, each IGRP router periodically flooded its routing table, but it differed from RIP in two ways. First, RIP’s advertisement interval was thirty seconds but IGRP’s was ninety seconds, which allowed IGRP to scale to larger networks than RIP. Second, RIP used a simple hop count metric, but IGRP’s more sophisticated metric was based on minimum path bandwidth and total path delay, with options to include link reliability and interface loading.
When the hostname.domainname associated with my Small Office Home Office (SOHO) failed to update after a power outage, and a new DHCP-assigned external address was assigned to my router, I was reminded of the need for Dynamic DNS. This article will explore the implem...
As is frequently the case these days, I get a brainstorm for an article during a Cisco Security training class I conduct. This summer I taught the Securing Networks with ASA Fundamentals class, which concentrates heavily on the Adaptive Security Device Manager (ASDM)...
As is sometimes the case, the idea for this article originated with a student question I received during one of the Securing Networks with ASA Fundamentals classes I have taught this summer. The course material mentions a simple scenario whereby IP Telephony traffic...
I recently came across an opportunity to use a relatively new feature in Cisco Unified Communications Manager (CUCM). Suppose you are the telecom administrator at a community hospital. During business hours, the Facilities Department is staffed and team members simpl...
Occasionally as I'm teaching a Cisco training class, I get an idea for a blog post and it happened again this week. The Securing Networks with ASA Fundamentals curriculum is mostly based on the Adaptive Security Device Manager (ASDM). While the class describes the us...
The subject of this week’s post was actually prompted by a question from a former colleague. Soon after the PIX Firewall added support for IPSec Virtual Private Networks, a command was added to the command-line, sysopt connection permit-ipsec. This command was subse...
Learn how to calculate QOS Bandwidth Percent vs Bandwidth Remaining Percent using a Cisco-defined formula. Read on for answers and examples from the experts at Global Knowledge!
There are many interesting new issues that seem to have come with the addition of voice and video to the data network. Most of the engineers that are now working on VoIP networks come from either a pure data network background or a traditional phone system background...
In my last post, we learned that the Dynamic Host Configuration Protocol (DHCP) is a computer networking protocol used by hosts, identified as DHCP clients, to retrieve IP address assignments and other configuration information. DHCP uses a client-server architectur...
I recently was presented with the challenge of logging ALL of the pertinent connection, disconnection, and termination messages associated with the Cisco SSL AnyConnect client without overwhelming the syslog capture display with extraneous messages. This blog will br...
Subnetting is a complicated topic that has confused students for a very long time. However, subnetting is an important topic for many different certifications with various vendors, including Cisco. In the real world environment, people are used to just punching in the numbers in many of the free subnet calculators that are readily available on the internet. For exam purposes, you still have to do this in a very fast manner since many exams are time-based and you don't have the luxury of spending those precious minutes on any single question. This Cisco training whitepaper will solve some of those age-old and complicated subnetting puzzles.
In light of the recent tragic events in Haiti, it might be a good time to review some of the requirements for a well designed Uninterruptible Power Source (UPS) to be included in all of our critical network installations. As a CCNA, we are called upon to help maintai...
Internet Protocol (IP) routing protocols have one primary goal: to fill the IP routing table with the current best routes it can find. The goal is simple, but the process and options can be complicated. Routing protocols define various ways that routers chat among th...
Last blog we looked at how we can use Trunk groups to ease the configuration of dial-peers and digit manipulation using analog FXO ports for an E911 solution. Now let’s take a look on how it can be used for T-1 CAS configurations and ISDN channel selection. The firs...
One aspect of Unified Communications is this concept of trunk groups. I will discuss what they are, what benefit they can provide and how to configure them for Cisco gateways. First of all the official definition of a trunk group is “A group of trunks serving the s...
There are some common misconceptions on the part of some of my students as to how VPN sessions are established from either a remote location or remote user to the ASA firewall. In particular, a “gray area” seems to be when the attributes from the tunnel group are app...
ASA and PIX software version 7.0 introduced the configuration command nat-control which didn’t exist in previous versions of code. Although training course material for both the SNAF (Securing Networks with ASA Fundamentals) and SNAA (Securing Networks with ASA Advan...
Cisco IP phones support a variety of different audio codecs. In this post, I will explain some of the differences and explain which versions of CUCM and the Cisco IP phones support the various audio codecs. Audio codecs are responsible for sampling human speech (a s...
In the previous discussion on QoS, the uses of Per-Hop Behaviors DiffServ to mark packets were identified and discussed in detail. Today’s post will identify the mechanisms to implement QoS. The five main categories of tools used to implement QoS are as follows. Cl...