Resource Library

The process of learning how to subnet IP addresses begins with understanding binary numbers and decimal conversions along with the basic structure of IPv4 addresses. This paper focuses on the mathematics of binary numbering and IP address structure.

Simulate the ITIL v3 Service Management Lifecycle with an interactive gaming experience.

While the Internet uses IP addresses assigned by an Internet authority such as the American Registry for Internet Numbers (ARIN), there are too few of these numbers to uniquely identify the millions of computers and computing devices in the world. Therefore, most enterprises use private addresses which allow them to identify the aforementioned computers. Of course, these IP numbers cannot be allowed on the Internet because all private networks use the same ones so there would be vast overlapping of addresses, and the addresses are not compliant anyway. Therefore, it is necessary to change the identity of a private host to a legal public host. This process is called Network Address Translation (NAT) and may be implemented on Cisco firewall products and Cisco routers. The firewall device(s) at the Internet demarcation point is by far the more popular way to implement NAT, but routers are used in small offices or small-to-medium-sized networks in which a separate firewalling solution is not possible or affordable. The focus of this paper is on the router-based NAT solution.

In this hour-long webinar by Global Knowledge instructor and ITIL Expert Michael Scarborough, you will learn how to study for and succeed in passing ITIL Intermediate Exams. You will learn how to approach an ITIL Intermediate exam, the true/false approach and why it works and how to study for the ITIL Intermediate exams.

Spanning Tree Protocol (STP) is dead, or at least it should be. It’s too slow to converge when there’s a change, and it causes issues with performance because there is only one forwarding path. It was developed in 1985 by Radia Perlman at Digital Equipment Corporation to allow for redundant paths within a Layer 2 topology, which was great in 1985. In fact, it was huge! So much so, that it was later standardized by the IEEE as 802.1D, and we’ve been living with it ever since.

Cisco Access Control Lists (ACLs) are used in nearly all product lines for several purposes, including filtering packets (data traffic) as it crosses from an inbound port to an outbound port on a router or switch, defining classes of traffic, and restricting access to devices or services. Knowing how to design, configure, and troubleshoot ACLs is required for all network engineers working within a Cisco network.

RTMT provides a set of canned views of both system resources and application counters that provide you with a snapshot of your environment right out of the box. Read on to learn how you can make RTMT even more helpful by customizing it to show you different views of your resources and CUCM environment.

In this video, Practice Leader Craig Brown discusses our exclusive Server 2008 course - Configuring, Managing, and Maintaining Server 2008 R2 (M6419). Specifically, the enhancements we've made to this course through Server 2008 R2 supplemental learning materials and custom hands-on labs that enable the student to utilize critical Server 2008 R2 functions after completing the course.

Nasser El-Batal will walk you through the most useful, recognized, and mandated ITSM best practices in the industry: TOGAF, COBIT and ITIL®. He will highlight the benefits of integrating them into a single implementation program to avoid project disaster. Discussions are focused on "Getting Your House in Order" and how to establish your own organization-specific business transformation program, while increasing your organization maturity.

Cloud computing enables development teams to get applications into production faster. IT Service Management (ITSM) leaders must adopt new strategies and change existing processes or risk becoming a barrier to success. Cloud computing requires DevOps-the blending of development and operations with the goal of accelerating time-to-market and reducing time-to-value. The good news is that ITIL® is uniquely positioned to accelerate DevOps, but it requires changes to existing ITSM processes.

In the spring of 2013, Cisco announced major updates to their Cisco Certified Network Associate (CCNA) curricula, including a new version of the CCNA Routing and Switching exam (200-120 CCNA). This paper provides a review of the CCNA Routing and Switching exam's critical concepts, as an aid to students preparing to pass the latest version of the CCNA Routing and Switching exam.

Global Knowledge Practice Leader, Craig Brown, explains what students will learn in our "Monitoring and Troubleshooting the Performance of a Windows Server Environment" workshop.

Many companies are already using VoIP while incorporating video capabilities into their portfolio of services. One question that I am often asked is, “How can we ensure that the voice and video quality is good and consistent when using VoIP?”

If you’re in IT, you’ve likely heard the saying, “In technology, the only thing constant is change itself,” and boy is that right! For technical companies, if you are not moving forward, then you’re falling behind. There is no such thing as standing still! A perfect example of this mindset is in Cisco’s evolution of video conferencing and telepresence.

According to Cisco marketing, Dynamic Multipoint VPN (DMVPN) “will lower capital and operation expenses, simplifies branch communications, reduces deployment complexity, and improves business resiliency.” Okay. But what is it, really, and why should we care?

With the advent of video use in our everyday communications, a number of questions commonly surface. One of them is the question of terminology. What's the difference between video conferencing and telepresence? What is meant by immersive technologies? Frankly, there is no one single right answer.

The short answer (and a common one in our industry): it depends. When comparing Cisco IOS with Juniper Junos, the decision to choose one over the other is difficult and often boils down to cost. Of course, there are other factors to consider.

Instructor Carol Kavalla talks about the advantages of taking a Cisco Data Center Unified Fabric Implementation class from Global Knowledge.

Michael Scarborough and Ryan Ballmer, co-authors of Global Knowledge ITIL courseware, discuss the difference between ITIL Capability courses and ITIL Lifecycle courses.

In this report, I've reviewed the 15 most popular certifications according to our more than 12,000 North American respondents to our annual IT Skills and Salary Survey. For each certification, you'll find a brief description, the average salary, and some insight into why it is popular.

You know you need to invest in training, but how do you get the best return on investment (ROI) from your training dollars? To help you make smart training decisions, we've put together this guide, which illustrates some alternative and little-known payment options, the types of discounts and promotions available with training and a suggested list of courses that give you excellent value.

Need to control the digits contained in the telephone number that enter or leave a gateway? Digit manipulation involves adding, subtracting, and changing telephone numbers. You can manipulate calling numbers, called numbers, and redirecting numbers, as well as the numbering plan and ISDN number type. Learn about the techniques that are applied to incoming or outgoing calls, or globally to all calls. You can also manipulate telephone numbers before or after a dial peer is matched.

Frequently, questions come up in the Cisco Contact Center Express classes I teach concerning the ability of the system to perform this or that task. In this blog post, I will cover some of the more popular questions I get during class.

A gap analysis is a tool that ITIL recommends organizations use to compare their current state to some future desired state.

Instructor John Harmon explains subnetting using binary numbers and decimal conversions.

Co-authors Michael Scarborough and Ryan Ballmer discuss some key differences in the new Global Knowledge ITIL courseware.

Michael Scarborough and Ryan Ballmer, co-authors of Global Knowledge ITIL courseware, discuss why ITIL is important to businesses.

Instructor John Harmon continues his explanation of subnetting by showing how subnet masks can be used to sub-divide networks.

In numerous Cisco classes, students learn about IPv4 and IPv6 address subnetting, complex subnetting, variable length subnet masking (VLSM), summarization, prefix routing, and address aggregation. These are valuable skills. In order to apply these skills efficiently, a network designer should possess one additional skill. Planning the IP address space for a Class A or B IPv4 address is necessary to apply the complex skills listed above properly. Complex subnetting, VLSM, and IP address summarization can be implemented simply and efficiently with proper planning.

Traditionally, ITIL and TOGAF professionals have been part of different teams within an organization. Due to the ongoing alignment of business and IT, these professionals now often find themselves on the same team. Because of this crossover, there is a growing trend towards organization of work based on multiple best practice models. 

John Barnes, Global Knowledge's Cisco Course Developer, discusses enhancements to our UCS Troubleshooting Boot Camp and suggestions for students in preparation for this course.

Many I&O leaders and customers see little value from investments in ITIL. Not getting the Return on Investment (ROI) you expect normally comes from using ITIL incorrectly. You, your staff, and your customers must share the same goals and understand exactly what to expect from your ITIL investments. The goal of ITIL is not “business and IT alignment” or “competitive advantage from IT investments.” Instead, its first goal is to stabilize service operation. This builds a base for the second goal: increasing value through service optimization. You must have clear-cut, documented, and managed expectations for each activity, and order is vital. Success requires that you stabilize service delivery before trying to optimize. Focusing on the correct goal and linking each ITIL task to that goal is the correct use of ITIL.

Meet Global Knowledge course director and lab topology architect Joey DeWiele, a specialist in Unified Communications. Joey will walk you through the benefits of our exclusive Cisco UC lab architecture - a more scalable and stable approach to the all-important labs featured in unified communications courses. Our labs feature upgraded hardware and software including Custom Lenovo T61 PCs, 7965 IP Phones, 3560 Switches and Call Manager 7. With our flexible UC architecture, students are able to view and experience the full lab architecture regardless of which Cisco UC course they are taking or the skill set they are seeking. The lab architecture features a realistic network with redundant environments that are made rich with multiple machines, pre-deployed tools with shortcuts, online documentation that is particular to individual pods, and multiple OS support for all virtual machines (Windows, Linux, VMware).

Global Knowledge instructor Doug Notini discusses the benefits of our FIREWALL 2.0 - Deploying Cisco ASA Firewall Solutions course.

ITIL is generally not prescriptive. In reality, the CSI Register at any given organization might look significantly different than the example given in the CSI book. The fields given in this example are important. 

Diane Teare, Global Knowledge's Cisco Course Director, discusses the advantages to taking our CCNA Boot Camp.

Global Knowledge Course Director and Lab Topology Architect Joey DeWiele, a specialist in Unified Communications, explains presence.

A video covering our Cisco Unified Communications courses - ACUCW1 & ACUCW2 - by Global Knowledge Course Director and Lab Topology Architect Joey DeWiele, a specialist in Unified Communications.

Global Knowledge Course Director and Lab Topology Architect Joey DeWiele, a specialist in Unified Communications, discusses Cisco Unity, Unity Connection & Unity Express.

Course director Jim Thomas explains how our custom labs, which utilize external hosts, ISR routers, and DMZ, provide a real-world environment for students.