Worldwide Locations
107 Results Found
I recently responded to a message on LinkedIn from a regular reader of this blog. He asked several questions which I will answer over the course of several posts. As part of his first question, he described a strategy report that his group is producing. The audience for this strategy report considers ITIL important to the future of their business, and so he must describe which ITIL processes his data center operations group works most closely with.
The most obvious difference is that hubs operate at Layer 1 of the OSI model while bridges and switches work with MAC addresses at Layer 2 of the OSI model. Hubs are really just multi-port repeaters. They ignore the content of an Ethernet frame and simply resend every frame they receive out every interface on the hub. The challenge is that the Ethernet frames will show up at every device attached to a hub instead of just the intended destination (a security gap), and inbound frames often collide with outbound frames (a performance issue).
Global Knowledge Course Director and Lab Topology Architect Joey DeWiele, a specialist in Unified Communications, explains the difference between Cisco's Call Manager Express & Call Manager.
As mentioned in last week’s post, interviews that require ITIL Intermediate level knowledge will most likely be targeted to specific process areas and activities. If I interviewed someone for a job that required ITIL Intermediate level knowledge, in addition to other questions about the specific technical responsibilities of the job, I might ask the following questions:
“Twisted Pair” is another way to identify a network cabling solution that’s also called Unshielded Twisted Pair (UTP) and was invented by Alexander Graham Bell in 1881. Indoor business telephone applications use them in 25-pair bundles. In homes, they were down to four wires, but in networking we use them in 8-wire cables. By twisting the pairs at different rates (twists per foot), cable manufacturers can reduce the electromagnetic pulses coming from the cable while improving the cable’s ability to reject common electronic noise from the environment.
Global Knowledge Course Director and Lab Topology Architect Joey DeWiele, a specialist in Unified Communications, explains QoS.
Good question! There are lots of networks, so I’m sorry to say that it depends. Let me explain. The smallest computer-based networks are usually PANs or Personal Area Networks. They can connect a wireless keyboard, mouse, or other devices to a computer. You may find them wirelessly linking a printer to your computer. You may have noticed these all include wireless connections. A PAN most often uses wireless technologies like infrared and Bluetooth, so it is really a WPAN (Wireless Personal Area Network).
For us wireless folks that aren’t stellar routing and switching guys, one of the most daunting network tasks is integrating our WLAN infrastructure with the existing wired infrastructure and its services. Understanding wired design topics is pretty fundamental to installing or managing any network, so it really should be on our priority list to spruce up those skills. To give you a nudge on your journey, let’s talk about DHCP for wireless clients.
In this hour-long webinar, security expert and Global Knowledge instructor Phillip D. Shade will provide insight into the emerging network security science of network forensics analysis, a.k.a. security event analysis and reconstruction. Using case studies, you will examine the role of data retention in network forensics analysis, and you will learn about applying forensics analysis techniques to handle application-based attacks, VoIP call interception, and worms, bots, and viruses.
In this hour-long webinar, Global Knowledge instructor John Barnes will guide you through implementing Cisco private VLANs. He will review VLANs and 802.1q, and he will discuss private VLAN fundamentals and operation, covering primary VLANs and secondary VLANs. He will cover VLAN mapping and discuss using private VLANs between multiple switches. He will also provide a use case example.