Resource Library

In the previous discussion on QoS, the uses of Per-Hop Behaviors DiffServ to mark packets were identified and discussed in detail. Today’s post will identify the mechanisms to implement QoS. The five main categories of tools used to implement QoS are as follows. Cl...

Cisco Unified Communications Manager (CUCM) includes a feature called "call throttling" that denies new call attempts when the system is in a state that may lead to delayed dial tone. The Real Time Monitoring Tool (RTMT) will generate a code yellow alert when call t...

When sending data end-to-end through a network, routers are used in internetworking to create a virtual network from one device to another, either locally or globally. Routers are configured to operate with most common network protocols. That means they know the form...

Find out which OSI layer is concerned with reliable end-to-end delivery of data - and more. Get answers to your OSI reference model and network layer questions here.

Call Admission Control (CAC) is often times included as part of the same topic as Quality of Service (QoS), when in actuality CAC is a separate and complete topic itself. QoS is defined as traffic engineering on a packet switched network. This definition means movin...

So far, in our discussion of Router Information Protocol (RIP), we’ve discussed the basics and also verified and reviewed RIP version1. We stated that RIP version 1 is a classful routing protocol that used FLSM and sent it routing updates without the subnet mask.  In...

RIP is a protocol that is used for routing IP networks. It was designed in the early 1980’s for communication between gateways (computers with two NIC’s). It is the oldest routing protocol used by the network industry and is considered by many to be inefficient or bo...

Recently we've been comparing using Telnet with Secure Shell protocol to allow remote access to a device such as a router or switch. Now, we're going to compare File Transfer Protocol (FTP) and Trivial File Transfer protocol (TFTP) for a Cisco router or switch. These...

You may have noticed that it’s the dynamic routing protocols that get all the glory. Since I like rooting (routing?) for the underdog, let’s talk about static routes! As you may recall, a router has three methods for learning a route. A route can appear in the routi...

When integrating a Voice over IP (VoIP) system into an existing network it is very important to have a good understanding of how much bandwidth is utilized for each call on the network. For most people, just starting out the bandwidth calculations can be a very daunt...