Worldwide Locations
108 Results Found
The purpose of Interior Routing Protocols (IGP), and routing protocols more generally, is to advertise the existence of destination networks. All protocols then have some method of picking what they would consider to be the best path and maintain the information. By...
What is Network Time Protocol (NTP)? Well, it’s a network protocol used to synchronize clocks between computing systems over a packet switched network. It’s been around since the mid-1980s and was developed by David Mills at the University of Delaware; it is one of the oldest protocols still around on the Internet. NTP replaced other time synchronization technologies that didn’t have some capabilities to adjust time based on location of the time source or time server relative to the receiver or adjusting to the variation of delay found on typical data networks.
Precision Time Protocol (PTP) is a protocol designed to go beyond what Network Time Protocol (NTP) can offer relative to accuracy. PTP is IEEE standard 1588 that can give local computing systems accuracy within the sub-microsecond range (such as microsecond, nanosecond or picoseconds) whereas NTP is within milliseconds or longer. PTP standard was first released in 2002 and known as 1588-2002. In 2008, the IEEE released a revised standard for PTP, known as 1588-2008, that improved the accuracy and precision of the protocol. It is also known as PTPv2 and is not backward compatible with the older version. PTP was developed for packet based network for control and measurement systems.
One size does not always fit all. At times there’s a need to run more than one routing protocol and have more than one routing domain: multivendor shops, migration from one protocol to another, scalability issues of a single protocol, political or personal preference, production versus test networks, mergers, and acquisitions.
Routers and switches make up the bulk of the network infrastructure and are vulnerable to attack. In a previous article, I talked about some of the different ways of hardening your network devices. In this blog, I’d like to specifically examine the routing protocols used on the major Cisco network operating systems.
Dynamic Multipoint Virtual Private Network (DMVPN) is a Cisco network solution for those with many sites that need access to either a hub site or to each other.
The VMware NSX platform combines networking and security functionality directly in the hypervisor and it interoperable with a vast majority of VMware’s products. The platform provides a set of logical networking elements and services, using logical switching, routing, load balancing, VPN, firewall, etc. This product decouples network functionality from the physical devices.
VMware announced Horizon 7 in February and subsequently released the software updates. Horizon 7 provides a more streamlined, high-performance virtual desktop and application experience. New updates include features such as Instant Clones, Smart Policies, Blast Extreme and greater scalability with Cloud Pod Architecture. Let’s dig into the seven key features that Horizon 7 brings!
What were the top paying IT and project management certifications for 2016? his article will help you answer both questions by providing a review of the 15 top-paying certifications.
Cisco Internetwork Operating System (IOS) has been around since a little after the inception of Cisco Systems as a company. In 1984, Len and Sandy Bosack from Stanford University founded Cisco Systems with a small commercial gateway server. The first Cisco router that I touched was an Advanced Gateway Server (AGS), which was the first marketed product of the company. After this came the Mid-Range Gateway Server (MGS), the Compact Gateway Server (CGS) and later the Integrated Gateway Server (IGS) and AGS+. The first version of IOS that I touched was 8.2(7). The operating system was based on a Unix-based system and was designed as a monolithic operating system, meaning that processes are stacked and interrelated.