104 Results Found
There are some common misconceptions on the part of some of my students as to how VPN sessions are established from either a remote location or remote user to the ASA firewall. In particular, a “gray area” seems to be when the attributes from the tunnel group are app...
ASA and PIX software version 7.0 introduced the configuration command nat-control which didn’t exist in previous versions of code. Although training course material for both the SNAF (Securing Networks with ASA Fundamentals) and SNAA (Securing Networks with ASA Advan...
Cisco IP phones support a variety of different audio codecs. In this post, I will explain some of the differences and explain which versions of CUCM and the Cisco IP phones support the various audio codecs. Audio codecs are responsible for sampling human speech (a s...
In the previous discussion on QoS, the uses of Per-Hop Behaviors DiffServ to mark packets were identified and discussed in detail. Today’s post will identify the mechanisms to implement QoS. The five main categories of tools used to implement QoS are as follows. Cl...
Cisco Unified Communications Manager (CUCM) includes a feature called "call throttling" that denies new call attempts when the system is in a state that may lead to delayed dial tone. The Real Time Monitoring Tool (RTMT) will generate a code yellow alert when call t...
When sending data end-to-end through a network, routers are used in internetworking to create a virtual network from one device to another, either locally or globally. Routers are configured to operate with most common network protocols. That means they know the form...
Find out which OSI layer is concerned with reliable end-to-end delivery of data - and more. Get answers to your OSI reference model and network layer questions here.
Call Admission Control (CAC) is often times included as part of the same topic as Quality of Service (QoS), when in actuality CAC is a separate and complete topic itself. QoS is defined as traffic engineering on a packet switched network. This definition means movin...
So far, in our discussion of Router Information Protocol (RIP), we’ve discussed the basics and also verified and reviewed RIP version1. We stated that RIP version 1 is a classful routing protocol that used FLSM and sent it routing updates without the subnet mask. In...
RIP is a protocol that is used for routing IP networks. It was designed in the early 1980’s for communication between gateways (computers with two NIC’s). It is the oldest routing protocol used by the network industry and is considered by many to be inefficient or bo...