176 Results Found
Course director Jim Thomas explains how our custom labs, which utilize external hosts, ISR routers, and DMZ, provide a real-world environment for students.
Rodger Foster, our senior Cisco instructor, reviews how multiple gateways are used to provide redundancy in the network.
This is another topic of heated debate, and it changes from network to network, but I found a simple approach that works in most cases. Since I have four queues and four classes of traffic, I need to categorize my important traffic into four classes. Strictly for explanation purposes I took some liberty in defining four categories of traffic that are very effective in both large and small networks. These classes are: Real Time Protocol (RTP), Network Management (NetMgt), Business Critical, and the Default.
That depends on their configurations. For example: While it makes very good sense to include redundant physical links in a network, connecting switches in loops, without taking the appropriate measures, will cause havoc on a network. Without the correct measures, a switch floods broadcast frames out all of its ports, causing serious problems for the network devices. The main problem is a broadcast storm where broadcast frames are flooded through every switch until all available bandwidth is used and all network devices have more inbound frames than they can process.
As we discussed previously, Cisco created the Nexus Operating System (NX-OS) to power its next-generation data-center switching platform. While this new OS shares many similarities to the original IOS, there are some definite differences that you need to be aware of as you begin using it.
The most obvious difference is that hubs operate at Layer 1 of the OSI model while bridges and switches work with MAC addresses at Layer 2 of the OSI model. Hubs are really just multi-port repeaters. They ignore the content of an Ethernet frame and simply resend every frame they receive out every interface on the hub. The challenge is that the Ethernet frames will show up at every device attached to a hub instead of just the intended destination (a security gap), and inbound frames often collide with outbound frames (a performance issue).
Global Knowledge Course Director and Lab Topology Architect Joey DeWiele, a specialist in Unified Communications, explains the difference between Cisco's Call Manager Express & Call Manager.
This week we'll review the IPv4 Address Classes including subnet masks, examples of Class C, Class B, and Class A subnet masks, and planning IPv4 addresses.
Both technologies, Ethernet and FC, satisfied the two conditions at that time, but there was a catch. Read more.
In the previous post, we discussed the need for VXLAN in the cloud along with the issues it solves. In this post, we will focus more on how VXLAN works.