Worldwide Locations
136 Results Found
In 2013, Cisco released their Software Defined Networking (SDN) solution for the data center known as Cisco Application Centric Infrastructure (ACI). For many years, the networking industry has been asking for an approach to configuring networking devices more efficiently than having to individually configure each and every router and switch.
The purpose of Interior Routing Protocols (IGP), and routing protocols more generally, is to advertise the existence of destination networks. All protocols then have some method of picking what they would consider to be the best path and maintain the information. By...
What is Network Time Protocol (NTP)? Well, it’s a network protocol used to synchronize clocks between computing systems over a packet switched network. It’s been around since the mid-1980s and was developed by David Mills at the University of Delaware; it is one of the oldest protocols still around on the Internet. NTP replaced other time synchronization technologies that didn’t have some capabilities to adjust time based on location of the time source or time server relative to the receiver or adjusting to the variation of delay found on typical data networks.
Precision Time Protocol (PTP) is a protocol designed to go beyond what Network Time Protocol (NTP) can offer relative to accuracy. PTP is IEEE standard 1588 that can give local computing systems accuracy within the sub-microsecond range (such as microsecond, nanosecond or picoseconds) whereas NTP is within milliseconds or longer. PTP standard was first released in 2002 and known as 1588-2002. In 2008, the IEEE released a revised standard for PTP, known as 1588-2008, that improved the accuracy and precision of the protocol. It is also known as PTPv2 and is not backward compatible with the older version. PTP was developed for packet based network for control and measurement systems.
This article will serve as an important reference in optimizing and stabilizing your Group Policy Deployment.
One size does not always fit all. At times there’s a need to run more than one routing protocol and have more than one routing domain: multivendor shops, migration from one protocol to another, scalability issues of a single protocol, political or personal preference, production versus test networks, mergers, and acquisitions.
Routers and switches make up the bulk of the network infrastructure and are vulnerable to attack. In a previous article, I talked about some of the different ways of hardening your network devices. In this blog, I’d like to specifically examine the routing protocols used on the major Cisco network operating systems.
Dynamic Multipoint Virtual Private Network (DMVPN) is a Cisco network solution for those with many sites that need access to either a hub site or to each other.
On September 26, 2016, Microsoft announced the general availability of Windows Server 2016. We already have a taste of what the user interface looks like from Windows 10. In actuality, there are a few other features that Windows 10 picked up first, such as PowerShell 5.0 and the latest version of Hyper-V, that are also part of Windows Server 2016. Many other heavy-hitting server-only features will be here soon.
What were the top paying IT and project management certifications for 2016? his article will help you answer both questions by providing a review of the 15 top-paying certifications.