20 Results Found
The short answer (and a common one in our industry): it depends. When comparing Cisco IOS with Juniper Junos, the decision to choose one over the other is difficult and often boils down to cost. Of course, there are other factors to consider.
Avaya introduced IP Office Manager Release 9.1 on December 22, 2014. As we all know from working with IP Office Manager, every new release brings changes to its GUI. Use this white paper to help you prepare to install and administer IP Office Manager 9.1.
If you’ve been around IT for even a few minutes, you’ve likely heard the acronyms “LAN” and “WAN” used by fellow technicians. But with all of the possible variations of networks—different sizes, different arrangements, and different protocols—how do you tell the difference between a LAN and a WAN and everything in between? The simple answer is one of scope and size.
Software-defined networking (SDN) is a solution that will enable your organization to meet the demands of network programmability and automation. The result will be greater network agility to support new applications while complying with increasing security needs.
Managers are in dire need of cybersecurity professionals with specific skills. If you’re looking to advance your career, or transfer into the cyber field, now is the time to get certified.
In this two part series, we look at the fundamentals of Avaya Aura Contact Center Scripting. Scripting design can be classified into four primary components: Call Sorting/Filtering Closed Condition Check Basic Treatment Loop Function
As many of you work on integrating Avaya Aura System and Session Manager into your networks, the case for troubleshooting will indeed occur. There are built in tests in the System Manager that allow you to run tests on 14 different areas, including Session Manager. But what do you do with the results when you get them? I am going to outline six of the most common problems and solutions when installing and implementing System and Session Manager and what steps you can take to troubleshoot and correct the problem.
Session Initiation Protocol (SIP) is an internet signaling protocol, developed by the IETF (starting in 1996), for establishing, maintaining, and tearing down sessions between a variety of real-time media, including voice, video, and chat. SIP allows endpoints to locate other endpoints, whether stationary or mobile. SIP doesn't have to worry about transporting voice or video as Real Time Transport Protocol (RTP) takes care of that. It also relies on Session Description Protocol (SDP) to negotiate capabilities and codecs. SIP does not provide a Directory Service or Authentication, but it does work with services such as LDAP or RADIUS. SIP is only concerned with signaling. This white paper is going to look at the way SIP is used in the converged Unified Communications environment.
Regardless of your vendor preference or your experience on the Juniper JUNOS CLI, assuming you have a point of reference to another vendor, your first thought when experiencing JUNOS is, “I have been here before.” The CLI is familiar, convenient, and polished. The similarities between JUNOS CLI and another CLI such as Cisco’s IOS are not what I want to focus on here however; it is their differences I want to focus on. But first, when you connect to a JUNOS powered device and access Operational Mode (see Brad Wilson’s blog post Introduction to Juniper Junos), it looks very much like the User EXEC Mode in IOS. In fact, there are a lot of JUNOS commands that are very much like the IOS User EXEC Mode commands.
The results are in, and analysis is complete from our seventh annual IT Skills and Salary Survey. This was our second in partnership with Windows IT Pro and one of the industry's largest with more than 12,000 North American respondents. Download your copy to learn how your salary, bonus, job function, and other factors compare to your peers.