Worldwide Locations
172 Results Found
Topping this year’s list is ISACA with four IT certifications, followed by AWS, Cisco and Citrix. Our 2018 IT Skills & Salary Report also shows trending areas in cybersecurity, cloud computing, and business—demonstrating what skills you need to become a more valuable and higher-paid IT professional.
The opportunities and challenges bring your own device (BYOD) represents are real; enterprises must make their network infrastructure BYOD-ready to meet the onslaught.
Certifications are the most common way in IT to prove you have the skills to solve various technical and business challenges. In this article, I'll address a range of skill sets. For each certification listed, I've included what the certification measures, the requirements to obtain it.
In 2013, Cisco released their Software Defined Networking (SDN) solution for the data center known as Cisco Application Centric Infrastructure (ACI). For many years, the networking industry has been asking for an approach to configuring networking devices more efficiently than having to individually configure each and every router and switch.
The purpose of Interior Routing Protocols (IGP), and routing protocols more generally, is to advertise the existence of destination networks. All protocols then have some method of picking what they would consider to be the best path and maintain the information. By...
What is Network Time Protocol (NTP)? Well, it’s a network protocol used to synchronize clocks between computing systems over a packet switched network. It’s been around since the mid-1980s and was developed by David Mills at the University of Delaware; it is one of the oldest protocols still around on the Internet. NTP replaced other time synchronization technologies that didn’t have some capabilities to adjust time based on location of the time source or time server relative to the receiver or adjusting to the variation of delay found on typical data networks.
Precision Time Protocol (PTP) is a protocol designed to go beyond what Network Time Protocol (NTP) can offer relative to accuracy. PTP is IEEE standard 1588 that can give local computing systems accuracy within the sub-microsecond range (such as microsecond, nanosecond or picoseconds) whereas NTP is within milliseconds or longer. PTP standard was first released in 2002 and known as 1588-2002. In 2008, the IEEE released a revised standard for PTP, known as 1588-2008, that improved the accuracy and precision of the protocol. It is also known as PTPv2 and is not backward compatible with the older version. PTP was developed for packet based network for control and measurement systems.
One size does not always fit all. At times there’s a need to run more than one routing protocol and have more than one routing domain: multivendor shops, migration from one protocol to another, scalability issues of a single protocol, political or personal preference, production versus test networks, mergers, and acquisitions.
Routers and switches make up the bulk of the network infrastructure and are vulnerable to attack. In a previous article, I talked about some of the different ways of hardening your network devices. In this blog, I’d like to specifically examine the routing protocols used on the major Cisco network operating systems.
Dynamic Multipoint Virtual Private Network (DMVPN) is a Cisco network solution for those with many sites that need access to either a hub site or to each other.