Resource Library

Wi-Fi networks have been misunderstood by much of the IT community since their inception. Even the reasons for this misunderstanding are kind of hard to understand. The result has been that myths about 802.11 (better known as Wi-Fi) networks have grown almost as fast as the technology itself. In this web seminar, we'll examine 11 common Wi-Fi myths and explore ways to use correct information to make your networks scalable, secure and satisfying for your users.

In Routing Tables part one, we covered the basic purpose of a routing table and how an end device or intermediate device such as a router or multilayer switch can route based off its table. We also viewed different routing tables and how they are used to find a given...

In ACLs - Part 1 we learned the basics of access lists, including the facts that ACLs: Are created in global config mode End with an implicit “deny any” (which can be overridden) Must be placed into service somewhere to have any effect Thus, the commands: Rout...

The triple constraints model has been one of the main staples for teaching project management for as long as I can remember. The model is generally represented by a triangle with Scope on the horizontal leg, Time on the left leg, Cost or Resources on the right leg an...

Cisco Switches and Routers running the Internet Operating System (IOS) have many things in common. Configuring these devices of course, is a skill that is sharpened the more you touch the device. During this post, our discussion will primarily focus on the basic comm...

In my last post we discussed basic terminal access. The commands that I reviewed were for accessing the console port or vty lines of a Cisco router or switch. Network administrators should configure banners for legal and liability purposes. Now, we will see how to co...

Telepresence is a set of technologies that allow video conferencing in such a way that the user feels as if they are actually at the remote site. Cisco sells a variety of platforms in the telepresence space supporting up to three 65” high definition video displays,...

In our last blog series we discussed multiple access commands that can be configured on a router or a switch. These commands included cosmetic commands such as logging synchronous and exec-timeout that can be configured on the console port. We also discussed configur...

Having discussed general ACL rules and syntax, let’s now turn to the differences between standard and extended ACLs. As you might recall, numbered ACLs fall into several ranges: 1 – 99: Standard IP 100 – 199: Extended IP 1300 - 1999: Standard IP (expanded rang...

As you may recall, we can use extended IP ACLs to filter packets based on source address, destination address, transport layer protocols, and other options, as follows: access-list 106 permit tcp host 1.2.3.4 host 5.6.7.8 eq telnet For a packet to be permitted by...

When we are addressing Voice over IP we need to remember that essentially we would like to reach customers over the PSTN or SS7 network. The only avenue to date to do this, is by using something called the telephone number. However, that number has undergone some cha...

When integrating a Voice over IP (VoIP) system into an existing network it is very important to have a good understanding of how much bandwidth is utilized for each call on the network. For most people, just starting out the bandwidth calculations can be a very daunt...

You may have noticed that it’s the dynamic routing protocols that get all the glory. Since I like rooting (routing?) for the underdog, let’s talk about static routes! As you may recall, a router has three methods for learning a route. A route can appear in the routi...

RIP is a protocol that is used for routing IP networks. It was designed in the early 1980’s for communication between gateways (computers with two NIC’s). It is the oldest routing protocol used by the network industry and is considered by many to be inefficient or bo...

Exchange 2010 builds upon the significant changes to the transport that were made in Exchange 2007. In this article, I'll review the transport pipeline and routing components and list some of the new architectural and administrative enhancements to the Exchange 2010...

Cisco Unified Communications Manager (CUCM) includes a feature called "call throttling" that denies new call attempts when the system is in a state that may lead to delayed dial tone. The Real Time Monitoring Tool (RTMT) will generate a code yellow alert when call t...

No matter what book or manual you use to study for the CCNA examination, you will see various protocols and processes referencing an RFC. And, although frequently referenced, the RFCs are seldom actually included in the documentation. So, the logical question becomes...

In the previous discussion on QoS the Per-Hop Behaviors DiffServ uses to mark packets were identified. These where listed as:Expedited Forwarding (EF) – RFC 3246 – Provides a strict priority serviceAssured Forwarding (AF) – RFC 2597 – Provides a qualified delivery gu...

ASA and PIX software version 7.0 introduced the configuration command nat-control which didn’t exist in previous versions of code. Although training course material for both the SNAF (Securing Networks with ASA Fundamentals) and SNAA (Securing Networks with ASA Advan...

Cisco Unified Communication H.323 and SIP gateways will require a dial plan on those gateways to extend calls to endpoints that may be configured. An endpoint may be either an analog or digital voice port that would provide connections to the public switch telephone...

One aspect of Unified Communications is this concept of trunk groups.  I will discuss what they are, what benefit they can provide and how to configure them for Cisco gateways. First of all the official definition of a trunk group is “A group of trunks serving the s...

Last blog we looked at how we can use Trunk groups to ease the configuration of dial-peers and digit manipulation using analog FXO ports for an E911 solution. Now let’s take a look on how it can be used for T-1 CAS configurations and ISDN channel selection. The firs...

Project procurement activities are often managed by specialists. By this I mean that the procurement department takes over responsibility for purchasing and contract management from the project manager. As a result of this separation of responsibilities, the steps and stages of procurement are often poorly understood by PMs. In this and the next few blog submissions, I will attempt to shed light on procurement activities and relate these activities to the PMI PMBOK.

Internet Protocol (IP) routing protocols have one primary goal: to fill the IP routing table with the current best routes it can find. The goal is simple, but the process and options can be complicated. Routing protocols define various ways that routers chat among th...

In part 8 of this series we are going to unravel the mysteries of congestion management and its four main queuing methods.Congestion is the result of many factors and can occur in many places on the network. A few of the reasons for congestion are traffic aggregation...

In light of the recent tragic events in Haiti, it might be a good time to review some of the requirements for a well designed Uninterruptible Power Source (UPS) to be included in all of our critical network installations. As a CCNA, we are called upon to help maintai...

In part 8 of this blog series congestion management and its four main queuing methods were explored. This post will look at the first of four queuing methods: First In First Out (FIFO) queuing. To refresh our memories, congestion can occur anywhere within a network,...

Subnetting is a complicated topic that has confused students for a very long time. However, subnetting is an important topic for many different certifications with various vendors, including Cisco. In the real world environment, people are used to just punching in the numbers in many of the free subnet calculators that are readily available on the internet. For exam purposes, you still have to do this in a very fast manner since many exams are time-based and you don't have the luxury of spending those precious minutes on any single question. This Cisco training whitepaper will solve some of those age-old and complicated subnetting puzzles.

WFQ is a flow-based method that sends packets over the network and ensures packet transmission efficiency which is critical to the interactive traffic. This method automatically stabilizes network congestion between individual packet transmission flows.

Part 10 of this blog series looked at Weighted Fair Queuing, so now we move on to the next queue mechanism; Class Based Weighted Fair Queuing (CBWFQ).CBWFQ provides user defined traffic classes allowing for more control and functionality then weighted Fair Queuing. C...

Part 11 of this blog series looked at Class Based Weighted Fair Queuing. This blog will explore the next queue mechanism; Low Latency Queuing (LLQ). As seen in the previous section of this QoS series, CBWFQ provides user defined traffic classes allowing for more con...

This report presents the results of a Canadian National survey, conducted by Global Knowledge in 2010. Its focus is on the future learning needs of business leaders. Four hundred twenty business leaders and managers responded to the survey, representing both corporate and government/public organizations as well as a wide range of industries and functional areas.  

The definition of cloud computing depends largely on whether you are a consumer or producer. The public cloud is geared more for the individual consumer or small company, while the private cloud is geared more for a medium-to-large company. In addition, the private cloud is branching out to incorporate the ability to have some data and applications serviced from the public cloud. This white paper examines the different types of cloud computing and shows what cloud computing can offer you.

The flexibility, reduced cost, and mobility of cloud computing have made the concept a hot topic. Before implementing this method of computing, however, it is important to consider the security of the "cloud." In this white paper, you will learn some of the risks and benefits of cloud computing to be sure it is the right solution for you.

Recently, I was asked the following question: “We plan to implement Windows 7 in our network very soon. We want to use Windows 2003 Domain Controllers for the next couple of years. Can we make the hundreds of new Group Policy setting available to Windows 7 Windows Server 2003 DCs?” This is not an unusual situation. Some organizations find they need to replace their desktop computers immediately because of age or obsolescence and others wish to upgrade to Windows 7 because of its superior security and performance. But there may be no budget or desire to upgrade to Windows 2008 or 2008 R2. Luckily, it is not difficult to adapt Server 2003 to work with Windows 7.

There are many interesting new issues that seem to have come with the addition of voice and video to the data network. Most of the engineers that are now working on VoIP networks come from either a pure data network background or a traditional phone system background...

Windows 7 can be a good file server on very small workgroup networks. Although Windows 7 is limited to only 10 concurrent client connections as a file server it can do a good job making files accessible over a network. Windows 7 shares a great deal of code with Windo...

We have three major issues that we need to deal with in order to successfully use routers within a WAN provider’s cloud: Multiple routing tables in RAM Excessive latency Address-space collisions Let’s assume that we have a WAN provider with two customers, “A” an...

The flexibility, reduced cost, and mobility of cloud computing have made the concept a hot topic. Before implementing this method of computing, however, it is important to consider the security of the "cloud." During this webinar, we will help you understand some of the risks and benefits of cloud computing so you can decide if it is the right solution for you.

The subject of this week’s post was actually prompted by a question from a former colleague.  Soon after the PIX Firewall added support for IPSec Virtual Private Networks, a command was added to the command-line, sysopt connection permit-ipsec. This command was subse...