Worldwide Locations
494 Results Found
Learn how to calculate QOS Bandwidth Percent vs Bandwidth Remaining Percent using a Cisco-defined formula. Read on for answers and examples from the experts at Global Knowledge!
There are many interesting new issues that seem to have come with the addition of voice and video to the data network. Most of the engineers that are now working on VoIP networks come from either a pure data network background or a traditional phone system background...
In my last post, we learned that the Dynamic Host Configuration Protocol (DHCP) is a computer networking protocol used by hosts, identified as DHCP clients, to retrieve IP address assignments and other configuration information. DHCP uses a client-server architectur...
Recently, I was asked the following question: “We plan to implement Windows 7 in our network very soon. We want to use Windows 2003 Domain Controllers for the next couple of years. Can we make the hundreds of new Group Policy setting available to Windows 7 Windows Server 2003 DCs?” This is not an unusual situation. Some organizations find they need to replace their desktop computers immediately because of age or obsolescence and others wish to upgrade to Windows 7 because of its superior security and performance. But there may be no budget or desire to upgrade to Windows 2008 or 2008 R2. Luckily, it is not difficult to adapt Server 2003 to work with Windows 7.
Part 11 of this blog series looked at Class Based Weighted Fair Queuing. This blog will explore the next queue mechanism; Low Latency Queuing (LLQ). As seen in the previous section of this QoS series, CBWFQ provides user defined traffic classes allowing for more con...
Part 10 of this blog series looked at Weighted Fair Queuing, so now we move on to the next queue mechanism; Class Based Weighted Fair Queuing (CBWFQ).CBWFQ provides user defined traffic classes allowing for more control and functionality then weighted Fair Queuing. C...
I recently was presented with the challenge of logging ALL of the pertinent connection, disconnection, and termination messages associated with the Cisco SSL AnyConnect client without overwhelming the syslog capture display with extraneous messages. This blog will br...
WFQ is a flow-based method that sends packets over the network and ensures packet transmission efficiency which is critical to the interactive traffic. This method automatically stabilizes network congestion between individual packet transmission flows.
In part 8 of this blog series congestion management and its four main queuing methods were explored. This post will look at the first of four queuing methods: First In First Out (FIFO) queuing. To refresh our memories, congestion can occur anywhere within a network,...
In light of the recent tragic events in Haiti, it might be a good time to review some of the requirements for a well designed Uninterruptible Power Source (UPS) to be included in all of our critical network installations. As a CCNA, we are called upon to help maintai...