Implementing Cisco QOS

This course is aimed at pre-and post-sales technical engineers responsible for designing, implementing, or troubleshooting networks and network architects responsible for designing multiservice networks to carry voice, video, and data traffic in enterprise or service provider environments.

• Channel Partner / Reseller
• Customer
• Employee

Implement Cisco's Quality of Service

• Explain the need for QoS, describe the fundamentals of QoS policy, identify and describe the different models that are used for ensuring QoS in a network.
• Explain the use of MQC and AutoQoS to implement QoS on the network and describe some of the mechanisms used to monitor QoS implementations.
• Given a converged network and a policy defining QoS requirements, classify and mark network traffic in order to implement the policy.
• Use Cisco queuing mechanisms to manage network congestion
• Use Cisco QoS congestion avoidance mechanisms to reduce the effects of congestion on the network.
• Use Cisco QoS traffic policing and traffic shaping mechanisms to effectively limit the rate of network traffic
• Use Cisco link efficiency mechanisms to improve the bandwidth efficiency of low-speed WAN links
• Describe the recommended best practices and methods used for end-to-end QoS deployment in the enterprise.

Module 1. Introduction to QoS

• Review Converged Networks
• Understand QoS
• Describe Best-Effort and Integrated Services Models
• Describe the Differentiated Services Model

Module 2. Implement and Monitor QoS

• MQC Introduction
• Monitor QoS
• Define Campus AutoQoS
• Define WAN AutoQoS

Module 3. Classification and Marking

• Classification and Marking Overview
• MQC for Classification and Marking
• NBAR for Classification
• Use of QoS Preclassify
• Campus Classification and Marking

Module 4. Congestion

• Queuing Introduction
• Configure WFQ
• Configure CBWFQ and LLQ
• Configure Campus Congestion Management

Module 5. Congestion Avoidance

• Congestion Avoidance Introduction
• Configure Class-Based WRED
• Configure ECN
• Describe Campus-Based Congestion Avoidance

Module 6. Traffic Policing and Shaping

• Traffic Policing and Shaping Overview
• Configure Class-Based Policing
• Campus Policing
• Configure Class-Based Shaping
• Configure Class-Based Shaping on Frame Relay Interfaces
• Configure Frame Relay Voice-Adaptive Traffic Shaping and Fragmentation

Module 7. Link Efficiency Mechanisms

• Link Efficiency Mechanisms Overview
• Configure Class-Based Header Compression
• Configure LFI

Module 8. Deploying End-to-End QoS

• Apply Best Practices for QoS Policy Design
• End-to-End QoS Deployments

Labs

• Lab 2-1: IP SLA Setup and QoS Baseline Measurement
• Lab 2-2: Configuring QoS with Cisco AutoQoS
• Case Study 3-1: Classification and Marking
• Lab 3-2: Classification and Marking Using MQC
• Lab 3-3: Using NBAR for Classification
• Lab 3-4: Configuring QoS Preclassify
• Lab 3-5: Campus Classification and Marking Using MQC
• Lab 4-1: Configuring Fair Queuing
• Lab 4-2: Configuring LLQ-CBWFQ
• Lab 4-3: Configuring Campus-Based Queuing Mechanisms
• Case Study 5-1: WRED Traffic Profiles
• Lab 5-2: Configuring DSCP-Based WRED

Attendees should meet the following prerequisites:

• Valid CCNA (ICND1 and ICND2 or CCNAX)

• CCNA - Implementing and Administering Cisco Solutions

Recommended preparation for exam(s):

• 642-642-QoS - Implementing Cisco QoS