Skip to main Content

Hardware Configuration and Definition (HCD) for z/OS

  • Code training ES96G
  • Duur 4 dagen
  • Taal Engels

Andere trainingsmethoden

Virtueel leren Prijs

eur3,400.00

(excl. BTW)

Vraag een groepstraining aan Schrijf je in

Ga naar:

Methode

Deze training is in de volgende formats beschikbaar:

  • Klassikale training

    Klassikaal leren

  • Virtueel leren

    Virtueel leren

Vraag deze training aan in een andere lesvorm.

Download de volledige beschrijving van de training

Trainingsbeschrijving

Naar boven

This course is designed to teach you how to use the Hardware Configuration Definition (HCD) of z/OS to create an I/O configuration and dynamically alter the I/O configuration.

Data

Naar boven
    • Methode: Virtueel leren
    • Datum: 13-17 juli, 2026 | 09:00 to 17:00
    • Locatie: Virtueel-en-klassikaal (W. Europe )
    • Taal: Engels

    eur3,400.00

    • Methode: Virtueel leren
    • Datum: 12-16 oktober, 2026 | 09:00 to 17:00
    • Locatie: Virtueel-en-klassikaal (W. Europe )
    • Taal: Engels

    eur3,400.00

    • Methode: Virtueel leren
    • Datum: 07-11 december, 2026 | 09:00 to 17:00
    • Locatie: Virtueel-en-klassikaal (W. Europe )
    • Taal: Engels

    eur3,400.00

Bekijk de volledige planning Meer data in andere landen

Doelgroep

Naar boven

This course is for people responsible for maintaining the I/O configuration contained in the input/output data files (IODFs) and input/output configuration data sets (IOCDs) at their z/OS installation.

Meer…

Trainingsdoelstellingen

Naar boven

After this course participants should be able to:

  • Describe new zSeries processor technology
  • Code new zSeries processors (z990 to z10)
  • Code ESCON channels and ESCON CTCs
  • Code FICON channels and FICON CTCs
  • Code Coupling Facilities (CF) and CF links
  • Code cascaded FICON Director
  • Create an IODF work file on a z processor from scratch
  • Use CHPID mapping tool to create a validated work IODF
  • Use work IODF and create a production IODF
  • Perform Dynamic I/O changes on a real z/OS system
  • Build a LOADxx parmlib member for initial program load (IPL)
  • View configuration graphically
  • Create appropriate configuration reports
Meer…

Inhoud training

Naar boven

Day 1

  • (00:30) Welcome
  • (01:00) Unit 1: HCD introduction
  • (00:30) Unit 2: IOCP and MVSCP macro review
  • (00:30) Unit 3: HCD dialog
  • (01:00) Unit 4: LPAR and logical control units
  • (02:00) Unit 5: ESCON Directors
  • (00:15) Unit 6: OSAs, HiperSockets, and routers
  • (00:30) Exercise 1: Overview of lab environment
  • (00:45) Exercise 2: HCD familiarity

Day 2

  • (00:30) Unit 7: Review of zSeries hardware
  • (01:30) Unit 8: z990, z9, z10, and HCD
  • (01:00) Unit 9: FICON, FICON CTCs, and FICON directors
  • (03:00) Exercise 3: Coding a zSeries 2094
  • (06:00) Exercise 4: Add ESCON directors to your configuration
  • (00:30) Exercise 5: Add FICON directors to your configuration (optional)

Day 3

  • (01:00) Unit 10: Planning and migration
  • (01:00) Unit 11: IPL and LOADxx member
  • (00:45) Unit 12: Dynamic I/O reconfiguration
  • (00:30) Exercise 6: Incremental migration from IOCP deck (optional)
  • (00:30) Exercise 7: Building a LOADxx member
  • (01:00) Exercise 8: Perform dynamic I/O

Day 4

  • (01:00) Unit 13: z10 HCD and using CMT
  • (01:00) Unit 14: ESCON CTCs for sysplex
  • (00:45) Unit 15: HCD and parallel sysplex
  • (00:45) Exercise 9: Coding a 2097 using the CMT
  • (00:30) Exercise 10: Coding CFs and CF links including z10 CIB links
  • (00:20) Exercise 11: Coding sysplex CTCs (optional)
Meer…

Voorkennis

Naar boven

You should have:

  • basic knowledge of z/OS and I/O configuration. This knowledge can be developed on the job or by taking Fundamental System Skills in z/OS (ES10GB).
Meer…

Aanvullende informatie

Naar boven
Official course book provided to participants
Meer…