Resource Library

Subnetting is a complicated topic that has confused students for a very long time. However, subnetting is an important topic for many different certifications with various vendors, including Cisco. In the real world environment, people are used to just punching in the numbers in many of the free subnet calculators that are readily available on the internet. For exam purposes, you still have to do this in a very fast manner since many exams are time-based and you don't have the luxury of spending those precious minutes on any single question. This Cisco training whitepaper will solve some of those age-old and complicated subnetting puzzles.

In light of the recent tragic events in Haiti, it might be a good time to review some of the requirements for a well designed Uninterruptible Power Source (UPS) to be included in all of our critical network installations. As a CCNA, we are called upon to help maintai...

Internet Protocol (IP) routing protocols have one primary goal: to fill the IP routing table with the current best routes it can find. The goal is simple, but the process and options can be complicated. Routing protocols define various ways that routers chat among th...

Project procurement activities are often managed by specialists. By this I mean that the procurement department takes over responsibility for purchasing and contract management from the project manager. As a result of this separation of responsibilities, the steps and stages of procurement are often poorly understood by PMs. In this and the next few blog submissions, I will attempt to shed light on procurement activities and relate these activities to the PMI PMBOK.

Last blog we looked at how we can use Trunk groups to ease the configuration of dial-peers and digit manipulation using analog FXO ports for an E911 solution. Now let’s take a look on how it can be used for T-1 CAS configurations and ISDN channel selection. The firs...

One aspect of Unified Communications is this concept of trunk groups.  I will discuss what they are, what benefit they can provide and how to configure them for Cisco gateways. First of all the official definition of a trunk group is “A group of trunks serving the s...

There are some common misconceptions on the part of some of my students as to how VPN sessions are established from either a remote location or remote user to the ASA firewall. In particular, a “gray area” seems to be when the attributes from the tunnel group are app...

ASA and PIX software version 7.0 introduced the configuration command nat-control which didn’t exist in previous versions of code. Although training course material for both the SNAF (Securing Networks with ASA Fundamentals) and SNAA (Securing Networks with ASA Advan...

Cisco IP phones support a variety of different audio codecs. In this post, I will explain some of the differences and explain which versions of CUCM and the Cisco IP phones support the various audio codecs. Audio codecs are responsible for sampling human speech (a s...

In the previous discussion on QoS, the uses of Per-Hop Behaviors DiffServ to mark packets were identified and discussed in detail. Today’s post will identify the mechanisms to implement QoS. The five main categories of tools used to implement QoS are as follows. Cl...

No matter what book or manual you use to study for the CCNA examination, you will see various protocols and processes referencing an RFC. And, although frequently referenced, the RFCs are seldom actually included in the documentation. So, the logical question becomes...

Cisco Unified Communications Manager (CUCM) includes a feature called "call throttling" that denies new call attempts when the system is in a state that may lead to delayed dial tone. The Real Time Monitoring Tool (RTMT) will generate a code yellow alert when call t...

When sending data end-to-end through a network, routers are used in internetworking to create a virtual network from one device to another, either locally or globally. Routers are configured to operate with most common network protocols. That means they know the form...

Find out which OSI layer is concerned with reliable end-to-end delivery of data - and more. Get answers to your OSI reference model and network layer questions here.

Call Admission Control (CAC) is often times included as part of the same topic as Quality of Service (QoS), when in actuality CAC is a separate and complete topic itself. QoS is defined as traffic engineering on a packet switched network. This definition means movin...

Exchange 2010 builds upon the significant changes to the transport that were made in Exchange 2007. In this article, I'll review the transport pipeline and routing components and list some of the new architectural and administrative enhancements to the Exchange 2010...

Devices must send dual-tone-multi-frequency (DTMF) when a phone call is routed to an automated system. Automated attendant (AA), voicemail (VM), or interactive voice response (IVR) systems are some examples of the types of automated systems that can pick up phone calls.

So far, in our discussion of Router Information Protocol (RIP), we’ve discussed the basics and also verified and reviewed RIP version1. We stated that RIP version 1 is a classful routing protocol that used FLSM and sent it routing updates without the subnet mask.  In...

RIP is a protocol that is used for routing IP networks. It was designed in the early 1980’s for communication between gateways (computers with two NIC’s). It is the oldest routing protocol used by the network industry and is considered by many to be inefficient or bo...

Recently we've been comparing using Telnet with Secure Shell protocol to allow remote access to a device such as a router or switch. Now, we're going to compare File Transfer Protocol (FTP) and Trivial File Transfer protocol (TFTP) for a Cisco router or switch. These...

You may have noticed that it’s the dynamic routing protocols that get all the glory. Since I like rooting (routing?) for the underdog, let’s talk about static routes! As you may recall, a router has three methods for learning a route. A route can appear in the routi...

When integrating a Voice over IP (VoIP) system into an existing network it is very important to have a good understanding of how much bandwidth is utilized for each call on the network. For most people, just starting out the bandwidth calculations can be a very daunt...

If you create presentations using the notes feature in PowerPoint, you probably have found yourself wanting to print multiple slides on one page (handouts) with the notes associated with those slides displayed on the same page. This layout can often help you better p...

Telepresence is a set of technologies that allow video conferencing in such a way that the user feels as if they are actually at the remote site. Cisco sells a variety of platforms in the telepresence space supporting up to three 65” high definition video displays,...

The triple constraints model has been one of the main staples for teaching project management for as long as I can remember. The model is generally represented by a triangle with Scope on the horizontal leg, Time on the left leg, Cost or Resources on the right leg an...

Wi-Fi networks have been misunderstood by much of the IT community since their inception. Even the reasons for this misunderstanding are kind of hard to understand. The result has been that myths about 802.11 (better known as Wi-Fi) networks have grown almost as fast as the technology itself. In this web seminar, we'll examine 11 common Wi-Fi myths and explore ways to use correct information to make your networks scalable, secure and satisfying for your users.