Worldwide Locations
17 Results Found
None of us have much time to waste, so what can you do when your environment changes quickly and you need to come up to speed on a device that you have never seen before? You find the quickest way to bring yourself up to speed. Some of you will have experience with other vendors’ equipment, and some of you will not have much experience at all; therefore, we will focus on topics that will get your feet wet the quickest and have you talking Junos in no time.
Regardless of your vendor preference or your experience on the Juniper JUNOS CLI, assuming you have a point of reference to another vendor, your first thought when experiencing JUNOS is, “I have been here before.” The CLI is familiar, convenient, and polished. The similarities between JUNOS CLI and another CLI such as Cisco’s IOS are not what I want to focus on here however; it is their differences I want to focus on. But first, when you connect to a JUNOS powered device and access Operational Mode (see Brad Wilson’s blog post Introduction to Juniper Junos), it looks very much like the User EXEC Mode in IOS. In fact, there are a lot of JUNOS commands that are very much like the IOS User EXEC Mode commands.
John Barnes, Global Knowledge's Cisco Course Developer, discusses enhancements to our UCS Troubleshooting Boot Camp and suggestions for students in preparation for this course.
The short answer (and a common one in our industry): it depends. When comparing Cisco IOS with Juniper Junos, the decision to choose one over the other is difficult and often boils down to cost. Of course, there are other factors to consider.
Global Knowledge Practice Leader, Craig Brown, explains what students will learn in our "Monitoring and Troubleshooting the Performance of a Windows Server Environment" workshop.
In this video, Practice Leader Craig Brown discusses our exclusive Server 2008 course - Configuring, Managing, and Maintaining Server 2008 R2 (M6419). Specifically, the enhancements we've made to this course through Server 2008 R2 supplemental learning materials and custom hands-on labs that enable the student to utilize critical Server 2008 R2 functions after completing the course.
In this video, instructor Charles Strother does a quick overview of what is needed to install a Read-Only Domain Controller (RODC) in a Windows Server 2008 environment.
One of the most significant new features in Microsoft Windows Server 2012 is the Hyper-V Replica (HVR) capability. Whether you are considering this for your own organization or just prepping for your Windows Server 2012 MCSA, this white paper presents the essentials of deploying this disaster recovery feature.
While there are differences between the IP Multicast configuration in the IOS and the Nexus OS, the Protocol Independent Multicast (PIM) protocol remains fundamentally the same. If you feel comfortable configuring Multicast in the IOS, you should be able to acclimate fairly easily to the changes in the Nexus OS.
Multicast Sparse Mode and its derivatives are supported in the Nexus OS. This white paper explains how it has been implemented in the Nexus platform to provide optimum performance in both virtual PortChannel and FabricPath environments.