Resource Library

Wi-Fi networks have been misunderstood by much of the IT community since their inception. Even the reasons for this misunderstanding are kind of hard to understand. The result has been that myths about 802.11 (better known as Wi-Fi) networks have grown almost as fast as the technology itself. In this web seminar, we'll examine 11 common Wi-Fi myths and explore ways to use correct information to make your networks scalable, secure and satisfying for your users.

The triple constraints model has been one of the main staples for teaching project management for as long as I can remember. The model is generally represented by a triangle with Scope on the horizontal leg, Time on the left leg, Cost or Resources on the right leg an...

Telepresence is a set of technologies that allow video conferencing in such a way that the user feels as if they are actually at the remote site. Cisco sells a variety of platforms in the telepresence space supporting up to three 65” high definition video displays,...

If you create presentations using the notes feature in PowerPoint, you probably have found yourself wanting to print multiple slides on one page (handouts) with the notes associated with those slides displayed on the same page. This layout can often help you better p...

When integrating a Voice over IP (VoIP) system into an existing network it is very important to have a good understanding of how much bandwidth is utilized for each call on the network. For most people, just starting out the bandwidth calculations can be a very daunt...

You may have noticed that it’s the dynamic routing protocols that get all the glory. Since I like rooting (routing?) for the underdog, let’s talk about static routes! As you may recall, a router has three methods for learning a route. A route can appear in the routi...

Recently we've been comparing using Telnet with Secure Shell protocol to allow remote access to a device such as a router or switch. Now, we're going to compare File Transfer Protocol (FTP) and Trivial File Transfer protocol (TFTP) for a Cisco router or switch. These...

RIP is a protocol that is used for routing IP networks. It was designed in the early 1980’s for communication between gateways (computers with two NIC’s). It is the oldest routing protocol used by the network industry and is considered by many to be inefficient or bo...

So far, in our discussion of Router Information Protocol (RIP), we’ve discussed the basics and also verified and reviewed RIP version1. We stated that RIP version 1 is a classful routing protocol that used FLSM and sent it routing updates without the subnet mask.  In...

Devices must send dual-tone-multi-frequency (DTMF) when a phone call is routed to an automated system. Automated attendant (AA), voicemail (VM), or interactive voice response (IVR) systems are some examples of the types of automated systems that can pick up phone calls.

Exchange 2010 builds upon the significant changes to the transport that were made in Exchange 2007. In this article, I'll review the transport pipeline and routing components and list some of the new architectural and administrative enhancements to the Exchange 2010...

Call Admission Control (CAC) is often times included as part of the same topic as Quality of Service (QoS), when in actuality CAC is a separate and complete topic itself. QoS is defined as traffic engineering on a packet switched network. This definition means movin...

Find out which OSI layer is concerned with reliable end-to-end delivery of data - and more. Get answers to your OSI reference model and network layer questions here.

When sending data end-to-end through a network, routers are used in internetworking to create a virtual network from one device to another, either locally or globally. Routers are configured to operate with most common network protocols. That means they know the form...

Cisco Unified Communications Manager (CUCM) includes a feature called "call throttling" that denies new call attempts when the system is in a state that may lead to delayed dial tone. The Real Time Monitoring Tool (RTMT) will generate a code yellow alert when call t...

No matter what book or manual you use to study for the CCNA examination, you will see various protocols and processes referencing an RFC. And, although frequently referenced, the RFCs are seldom actually included in the documentation. So, the logical question becomes...

In the previous discussion on QoS, the uses of Per-Hop Behaviors DiffServ to mark packets were identified and discussed in detail. Today’s post will identify the mechanisms to implement QoS. The five main categories of tools used to implement QoS are as follows. Cl...

Cisco IP phones support a variety of different audio codecs. In this post, I will explain some of the differences and explain which versions of CUCM and the Cisco IP phones support the various audio codecs. Audio codecs are responsible for sampling human speech (a s...

ASA and PIX software version 7.0 introduced the configuration command nat-control which didn’t exist in previous versions of code. Although training course material for both the SNAF (Securing Networks with ASA Fundamentals) and SNAA (Securing Networks with ASA Advan...

There are some common misconceptions on the part of some of my students as to how VPN sessions are established from either a remote location or remote user to the ASA firewall. In particular, a “gray area” seems to be when the attributes from the tunnel group are app...

One aspect of Unified Communications is this concept of trunk groups.  I will discuss what they are, what benefit they can provide and how to configure them for Cisco gateways. First of all the official definition of a trunk group is “A group of trunks serving the s...

Last blog we looked at how we can use Trunk groups to ease the configuration of dial-peers and digit manipulation using analog FXO ports for an E911 solution. Now let’s take a look on how it can be used for T-1 CAS configurations and ISDN channel selection. The firs...

Project procurement activities are often managed by specialists. By this I mean that the procurement department takes over responsibility for purchasing and contract management from the project manager. As a result of this separation of responsibilities, the steps and stages of procurement are often poorly understood by PMs. In this and the next few blog submissions, I will attempt to shed light on procurement activities and relate these activities to the PMI PMBOK.

Internet Protocol (IP) routing protocols have one primary goal: to fill the IP routing table with the current best routes it can find. The goal is simple, but the process and options can be complicated. Routing protocols define various ways that routers chat among th...

In light of the recent tragic events in Haiti, it might be a good time to review some of the requirements for a well designed Uninterruptible Power Source (UPS) to be included in all of our critical network installations. As a CCNA, we are called upon to help maintai...

Subnetting is a complicated topic that has confused students for a very long time. However, subnetting is an important topic for many different certifications with various vendors, including Cisco. In the real world environment, people are used to just punching in the numbers in many of the free subnet calculators that are readily available on the internet. For exam purposes, you still have to do this in a very fast manner since many exams are time-based and you don't have the luxury of spending those precious minutes on any single question. This Cisco training whitepaper will solve some of those age-old and complicated subnetting puzzles.

I recently was presented with the challenge of logging ALL of the pertinent connection, disconnection, and termination messages associated with the Cisco SSL AnyConnect client without overwhelming the syslog capture display with extraneous messages. This blog will br...

Microsoft SQL Server has evolved over the years as a scalable, robust database management system and is now competing in the VLDB (Very Large Database) space with Oracle and IBM. The market share for the product continues to grow, based on total cost of ownership and ease of use. This white paper outlines some of the important fundamentals of Microsoft SQL Server 2008 that every DBA should know.

The definition of cloud computing depends largely on whether you are a consumer or producer. The public cloud is geared more for the individual consumer or small company, while the private cloud is geared more for a medium-to-large company. In addition, the private cloud is branching out to incorporate the ability to have some data and applications serviced from the public cloud. This white paper examines the different types of cloud computing and shows what cloud computing can offer you.

The flexibility, reduced cost, and mobility of cloud computing have made the concept a hot topic. Before implementing this method of computing, however, it is important to consider the security of the "cloud." In this white paper, you will learn some of the risks and benefits of cloud computing to be sure it is the right solution for you.

Recently, I was asked the following question: “We plan to implement Windows 7 in our network very soon. We want to use Windows 2003 Domain Controllers for the next couple of years. Can we make the hundreds of new Group Policy setting available to Windows 7 Windows Server 2003 DCs?” This is not an unusual situation. Some organizations find they need to replace their desktop computers immediately because of age or obsolescence and others wish to upgrade to Windows 7 because of its superior security and performance. But there may be no budget or desire to upgrade to Windows 2008 or 2008 R2. Luckily, it is not difficult to adapt Server 2003 to work with Windows 7.

In my last post, we learned that the Dynamic Host Configuration Protocol (DHCP) is a computer networking protocol used by hosts, identified as DHCP clients, to retrieve IP address assignments and other configuration information. DHCP uses a client-server architectur...

There are many interesting new issues that seem to have come with the addition of voice and video to the data network. Most of the engineers that are now working on VoIP networks come from either a pure data network background or a traditional phone system background...

Learn how to calculate QOS Bandwidth Percent vs Bandwidth Remaining Percent using a Cisco-defined formula. Read on for answers and examples from the experts at Global Knowledge!

Windows 7 can be a good file server on very small workgroup networks. Although Windows 7 is limited to only 10 concurrent client connections as a file server it can do a good job making files accessible over a network. Windows 7 shares a great deal of code with Windo...

The flexibility, reduced cost, and mobility of cloud computing have made the concept a hot topic. Before implementing this method of computing, however, it is important to consider the security of the "cloud." During this webinar, we will help you understand some of the risks and benefits of cloud computing so you can decide if it is the right solution for you.

Even in professionally managed network environments it is still possible for mistakes to happen. If an Active Directory object such as a user or computer account is accidentally deleted  network access will be lost. Worker productivity will decline until the account...

The subject of this week’s post was actually prompted by a question from a former colleague.  Soon after the PIX Firewall added support for IPSec Virtual Private Networks, a command was added to the command-line, sysopt connection permit-ipsec. This command was subse...

Private networks are under constant threat of attack, even when steps have been taken to "secure" them. The large volume of malicious codes, and their ability to evolve and adapt, requires security professionals and common computer/internet users alike to be mindful of their actions and constantly play defense. This white paper focuses on 10 common ways that malicious code can penetrate a network. Knowledge of these methods and the ability to recognize them are the first steps in preventing them from succeeding in harming your network.

Windows Vista introduced AERO, a desktop experience that had four major elements; Windows Flip, Windows Filmstrip, AERO Glass transparency and fully realized thumbnail views on the Taskbar. Windows 7 added several new features to AERO, including AERO Snap, AERO Shake...