QOS - Implementing Cisco Quality of Service v2.5

In this course, you will learn about QoS requirements, conceptual models such as best effort, IntServ, and DiffServ, and the implementation of QoS on Cisco platforms. The curriculum covers the theory of QoS, design issues, and configuration of various QoS mechanisms to facilitate the creation of effective administrative policies providing QoS.

View Entire Schedule

Implement the appropriate QoS mechanisms required to create an effective administrative policy providing QoS

Viewing outline for:

Classroom Live Outline

1. Introduction to QoS

Review Converged Networks
Understand QoS
Describe Best-Effort and Integrated Services Models
Describe the Differentiated Services Model
Module Summary
Module Self-Check

2. Implement and Monitor QoS

MQC Introduction
Monitor QoS
Define Campus AutoQoS
Define WAN AutoQoS
Module Summary
Module Self-Check

3. Classification and Marking

Classification and Marking Overview
MQC for Classification and Marking
NBAR for Classification
Use of QoS Preclassify
Campus Classification and Marking
Module Summary
Module Self-Check

4. Congestion Management

Queuing Introduction
Configure WFQ
Configure CBWFQ and LLQ
Configure Campus Congestion Management
Module Summary
Module Self-Check

5. Congestion Avoidance

Congestion Avoidance Introduction
Configure Class-Based WRED
Configure ECN
Describe Campus-Based Congestion Avoidance
Module Summary
Module Self-Check

6. Traffic Policing and Shaping

Traffic Policing and Shaping Overview
Configure Class-Based Policing
Campus Policing
Configure Class-Based Shaping
Configure Class-Based Shaping on Frame Relay Interfaces
Configure Frame Relay Voice-Adaptive Traffic Shaping and Fragmentation
Module Summary
Module Self-Check

7. Link Efficiency Mechanisms

Link Efficiency Mechanisms Overview
Configure Class-Based Header Compression
Configure LFI
Module Summary
Module Self-Check

8. Deploying End-to-End QoS

Apply Best Practices for QoS Policy Design
End-to-End QoS Deployments
Module Summary
Module Self-Check

Viewing labs for:

Classroom Live Labs

Lab 1: Connection and Orientation to the Voice Lab Environment

Lab 2: Implementing Basic CUCM configurations and Cisco IP Phones

Lab 3: Implementing Cisco Unified Border Element (CUBE) for calls to and from the Actual PSTN

Lab 4: Case Study: QoS Mechanisms

Lab 5: Packet Generator Configuration

Lab 6: Lab 5: IP SLA Setup and QoS Baseline Measurement

Lab 7: Configuring QoS with Cisco AutoQoS

Lab 8: Case Study: Classification and Marking

Lab 9: Classification and Marking Using MQC

Lab 10: Using NBAR for Classification

Lab 11: Configuring QoS Pre-classify

Lab 12: Configuring Fair Queuing

Lab 13: Configuring LLQ-CBWFQ

Lab 14: Case Study: WRED Traffic Profiles

Lab 15 Configuring DSCP-Based WRED

Lab 16: Configuring Class-Based Policing

Lab 17 Configuring Class-Based Shaping

Cisco Certified Networking Associate
CCNA Routing and Switching

Pre- and post-sales technical engineers responsible for designing, implementing, or troubleshooting networks
Network architects responsible for designing multiservice networks to carry voice, video, and data traffic in enterprise or service provider environments
Advanced Unified Communications (UC) Specialization
Master UC Specialization
Master Telepresence Authorized Technology Provider (ATP)

This course can be purchased using Cisco Learning Credits (CLCs).

Cart () Loading...

Subtotal

QOS - Implementing Cisco Quality of Service v2.5

Classroom Live Outline

1. Introduction to QoS

2. Implement and Monitor QoS

3. Classification and Marking

4. Congestion Management

5. Congestion Avoidance

6. Traffic Policing and Shaping

7. Link Efficiency Mechanisms

8. Deploying End-to-End QoS

1. Introduction to QoS

2. Implement and Monitor QoS

3. Classification and Marking

4. Congestion Management

5. Congestion Avoidance

6. Traffic Policing and Shaping

7. Link Efficiency Mechanisms

8. Deploying End-to-End QoS

Classroom Live Labs

Lab 1: Connection and Orientation to the Voice Lab Environment

Lab 2: Implementing Basic CUCM configurations and Cisco IP Phones

Lab 3: Implementing Cisco Unified Border Element (CUBE) for calls to and from the Actual PSTN

Lab 4: Case Study: QoS Mechanisms

Lab 5: Packet Generator Configuration

Lab 6: Lab 5: IP SLA Setup and QoS Baseline Measurement

Lab 7: Configuring QoS with Cisco AutoQoS

Lab 8: Case Study: Classification and Marking

Lab 9: Classification and Marking Using MQC

Lab 10: Using NBAR for Classification

Lab 11: Configuring QoS Pre-classify

Lab 12: Configuring Fair Queuing

Lab 13: Configuring LLQ-CBWFQ

Lab 14: Case Study: WRED Traffic Profiles

Lab 15 Configuring DSCP-Based WRED

Lab 16: Configuring Class-Based Policing

Lab 17 Configuring Class-Based Shaping

Lab 1: Connection and Orientation to the Voice Lab Environment

Lab 2: Implementing Basic CUCM configurations and Cisco IP Phones

Lab 3: Implementing Cisco Unified Border Element (CUBE) for calls to and from the Actual PSTN

Lab 4: Case Study: QoS Mechanisms

Lab 5: Packet Generator Configuration

Lab 6: Lab 5: IP SLA Setup and QoS Baseline Measurement

Lab 7: Configuring QoS with Cisco AutoQoS

Lab 8: Case Study: Classification and Marking

Lab 9: Classification and Marking Using MQC

Lab 10: Using NBAR for Classification

Lab 11: Configuring QoS Pre-classify

Lab 12: Configuring Fair Queuing

Lab 13: Configuring LLQ-CBWFQ

Lab 14: Case Study: WRED Traffic Profiles

Lab 15 Configuring DSCP-Based WRED

Lab 16: Configuring Class-Based Policing

Lab 17 Configuring Class-Based Shaping

Course Delivery