Live Chat
Monday - Friday 8am - 6pm EST Chat Now
Contact Us
Monday - Friday 8am - 8pm EST 1-866-716-6688 Other Contact Options
Checkout

Cart () Loading...

    • Quantity:
    • Delivery:
    • Dates:
    • Location:

    $

Cisco Optical Technology Advanced (OPT300)

Learn the advanced features of Cisco ONS 15454 Multiservice Transport Platform (MSTP) and Network Convergence System (NCS) 2000 Series dense wavelength-division multiplexing (DWDM).

GK# 3786

Course Overview

TOP

This course covers topics not covered in the intermediate version. You will learn how to design DWDM networks using the Cisco Transport Planning (CTP) tool. You learn how the 40- and 80-channel mesh networks are designed, and you set up a six-node WXC-based 40- or 80-channel mesh network. You will also learn how the 40-channel SMR1 and/or SMR2 network is designed and set up a six-node 40-channel network. In the hands-on labs, you learn to configure: the Cisco Transport Controller, the 10 Gbps (G) data cards, the 1 gigabit/10 gigabit Ethernet enhanced crossponder, any rate muxponder and crossponder, 100G transponders and muxponders, 10G encryption, and T1 over Ethernet. There is also a review of G.709 encapsulation, G.7041 Generic Framing Protocol (GFP), forward error correction and coherent transmission. Additionally, you will learn how to add a node to the existing six-node ring and troubleshoot the configuration. The course combines lecture materials and hands-on labs throughout to make sure that you are able to successfully deploy a Cisco data over DWDM network.

What You'll Learn

TOP
  • Run the Cisco CTP tool and design sample DWDM networks
  • Principles of a wavelength cross-connect (WXC)-based mesh network
  • Configure a six-node WXC-based mesh network and create DWDM circuits
  • Principles of a single-module ROADM (SMR) based mesh network
  • Configure a six-node SMR-based mesh network and create DWDM circuits
  • Configure the 10-GB data cards with appropriate G.709 options and create data circuits
  • Install and configure the any rate crossponder card for 8 x 20 protected data mode
  • Properly configure Ethernet options for Layer 1 transport using the Gigabit Ethernet and 10 Gigabit Ethernet crossponder cards
  • Install Ethernet options for Layer 2 protected and unprotected data ring circuits using the Gigabit Ethernet and 10 Gigabit Ethernet crossponder cards
  • Provision incoming class of service (CoS) marking by port and by customer VLAN and incoming traffic shaping
  • Understand -general queuing theory and set up quality of service (QoS) as implemented in the Gigabit Ethernet and 10 Gigabit Ethernet enhanced crossponder cards
  • Install and connect circuits to carry T1 over Ethernet
  • Install and configure 100 Gigabit Ethernet transponder and muxponder cards and circuits
  • Install the 10G Encryption Card and verify error-free operation
  • Add a node to the existing six node 40-channel ring
  • Troubleshooting techniques and lab

Outline

TOP
Viewing outline for:

Classroom Live Outline

1. Cisco Transport Planner (CTP) Design Tool

2. Cisco Transport Controller (CTC) Operations

3. WSS- and WXC-Based Mesh Networks

4. Node Turn-Up: 40/80 WXC Mesh Technology

5. Install Circuits and View Power Levels in WSS and WXC Networks

6. SMR-Based Network and Node Turn-Up

7. Install Circuits and View Power Levels in SMR1 and 2 Networks

8. G.709 Encapsulation and 10G Transponders and Encapsulation Options

9. 10 Gigabit Transponders

10. Generic Framing Protocol G.7041 and 10G Data Multiplexer Enhanced Cards and Encapsulation Options

11. Any-Rate Muxponder and Crossponder Cards

12. Ethernet and VLANs

13. 10 GE-XP and GE-XP Enhanced Cards, Settings, and Circuits Layer 1

14. Quality of Service

15. Layer 2 XP-E Cards Protected Ring, CoS Marking by Port, Customer VLAN, and QoS

16. T1 over Ethernet in Crossponder Network

17. 100G Transponder and Muxponder Installation and Circuits

18. 10G Encryption Card

19. Add-a-Node Design and Installation

20. ONS 15454 MSTP Troubleshooting

Labs

TOP
Viewing labs for:

Classroom Live Labs

Lab 1: Start the Cisco Transport Planner Software and Create a DWDM Network

Lab 2: Configure Cisco Transport Controller and Display Network

Lab 3: Establish 6-Node 40- and 80-Channel Mesh Networks

Lab 4: Create Circuits and View Power Levels in 40 and 80 WXC Networks

Lab 5: Establish Six-Node SMR1 and SMR2 Mesh Networks

Lab 6: Create Circuits and view Power levels in SMR1 and 2 Networks

Lab 7: Establish 10G Transponder Circuits

Lab 8: Any Rate Muxponder and Crossponder Options 8:2 configuration

Lab 9: 1G and 10G Crossponder Layer 1 Network

Lab 10: 1G and 10G Enhanced Crossponder Layer Two-Ring Configuration

Lab 11: Circuits to Carry T1 over Ethernet

Lab 12: 100 Gigabit Transponders and 10 x 10 Muxponders

Lab 13: 10G Encryption Card Circuit

Lab 14: Add-a-Node to Six-Node Mesh Network

Lab 15: MSTP Troubleshooting

Prerequisites

TOP
  • Completion of Cisco Fundamentals of Fiber Optics Technology (FFOT) video training
  • Cisco Optical Technology Intermediate courseĀ 

Note: To locate Cisco courses that cover the listed prerequisites, go to the Cisco Training and Events webpage at http://www.cisco.com/web/learning/index.html.

Who Should Attend

TOP
  • Technical professionals who need to know how to deploy data over the DWDM network.
  • Designers
  • System engineers and implementation staff
  • Network operations center personnel
  • Technical support personnel who are involved with the deployment, operations, and maintenance of the Cisco ONS 15454 MSTP system
  • Channel partners and resellers
Course Delivery

This course is available in the following formats:

Classroom Live

Receive face-to-face instruction at one of our training center locations.

Duration: 3 day

Virtual Classroom Live

Experience expert-led online training from the convenience of your home, office or anywhere with an internet connection.

Duration: 3 day

Request this course in a different delivery format.
Enroll